1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

HELP! How to Take Apart an SKB 885

Discussion in 'Shooting Related Threads' started by sterlingz, Jul 24, 2009.

Thread Status:
Not open for further replies.
  1. sterlingz

    sterlingz TS Member

    Joined:
    Jul 8, 2007
    Messages:
    24
    Can anybody out there tell me how to get the stock off my SKB 885. I got it to move about a half inch, but thats it. Thank you

    Sterling
     
  2. sterlingz

    sterlingz TS Member

    Joined:
    Jul 8, 2007
    Messages:
    24
    I've got it laying on the table in front of me in pieces, but I cant't figure out the last piece I need to remove to get it apart.
     
  3. Jawari2000

    Jawari2000 Member

    Joined:
    Jan 29, 1998
    Messages:
    141
    Assuming you have unscrewed the nut that secures the stock to the receiver and taken out the washer, take a wooden dowel and gently tap the long screw with it using a hammer. Make sure you do it on a padded surface in case the receiver falls out of the stock. Hope this helps.
     
  4. redhawk

    redhawk Member

    Joined:
    Jan 29, 1998
    Messages:
    454
    Did you remove the side plates?If you didn't dont worry nothing will fall out,their cosmetic.Keepin mind that the screws are timed,so put them back in the same holes.
     
Thread Status:
Not open for further replies.
Search tags for this page
how to remove the stock on a skb 885
,

skb 885 stock removal procedure