1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Help AL 391 stock Nut

Discussion in 'Shooting Related Threads' started by capt jay, Apr 1, 2010.

Thread Status:
Not open for further replies.
  1. capt jay

    capt jay Member

    Joined:
    Jan 29, 1998
    Messages:
    130
    I would like to remove the stock on my Bretta AL 391 what size nut

    Help..........
     
  2. Ruck

    Ruck Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    2,045
    Use a 13mm socket.

    Ken Rucker
     
  3. straightsixes

    straightsixes TS Member

    Joined:
    Jan 21, 2007
    Messages:
    51
    13 mm. Using a deep socket will make the task easy. Whoops like like you beat me to it. Have a good day everyone.
     
  4. capt jay

    capt jay Member

    Joined:
    Jan 29, 1998
    Messages:
    130
    Thank You

    Jay
     
  5. cubancigar2000

    cubancigar2000 Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    10,521
    Location:
    Idaho
    I have a bunch of 303's and on some there is not enough room to get a socket in so I made a slot in the nut and use a large flat homemade screw driver with a T handle. If you have room it is a 13 mm thinwall deep socket
     
Thread Status:
Not open for further replies.