1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

help 366 in omaha

Discussion in 'Uncategorized Threads' started by nailer123, May 16, 2008.

Thread Status:
Not open for further replies.
  1. nailer123

    nailer123 TS Member

    Joined:
    Feb 19, 2008
    Messages:
    335
    I pick up a used 366. Is there any one in omaha nebraska that works on them. Have talk to hornandy did what they told me still cant get to work.This what is going on the handle is stoping about half way down looks like it is not running smooth on the back cam. It is also hangs up on the premier adjusted up and down no luck.I checked the powder drop and i get between 17.5 and 19 grains .So what do i do now . I'm ready to go back to my mec jr.
     
  2. 682b

    682b Member

    Joined:
    Jan 29, 1998
    Messages:
    386
    Nailer, check your private messages. JIM
     
  3. omgb

    omgb Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    1,759
    Location:
    Santa Clarita, CA
    Nailer, I use 366s exclusivly. Email me and lets chat. I'll see if I can get you up and going. I've had some really awfully damaged presses that I was able to bring back to full function. (UPS is un-freeken-believable in what they can to to good steel).
     
  4. nailer123

    nailer123 TS Member

    Joined:
    Feb 19, 2008
    Messages:
    335
  5. Ray Zeilinger

    Ray Zeilinger Member

    Joined:
    Jan 29, 1998
    Messages:
    49
    give me a call 690-2497
    Ray
     
  6. Ray Zeilinger

    Ray Zeilinger Member

    Joined:
    Jan 29, 1998
    Messages:
    49
    give me a call on my cell 690-2497
    Ray
     
  7. Ray Zeilinger

    Ray Zeilinger Member

    Joined:
    Jan 29, 1998
    Messages:
    49
    It sounds like the deprimer rod is dished out on the top.
    give me a call 402-690-2497
    Ray
     
  8. nailer123

    nailer123 TS Member

    Joined:
    Feb 19, 2008
    Messages:
    335
    Thank you everone for your help . I have hope now .Ray is going to help me set it up.You guys are great. Thank you again
     
Thread Status:
Not open for further replies.