1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Have you used this for stock refinishing ????

Discussion in 'Shooting Related Threads' started by jeffprigge, Dec 19, 2012.

Thread Status:
Not open for further replies.
  1. jeffprigge

    jeffprigge Active Member

    Joined:
    Jan 29, 1998
    Messages:
    1,055
    Mash on link , Have you used this oil in spray can before for stock refinishing , how did you like it ??? Thanks for you input Jeff
     
  2. jeffprigge

    jeffprigge Active Member

    Joined:
    Jan 29, 1998
    Messages:
    1,055
    link does not work , this is the name of it . CHEM-PAK - Gun Sav'R CUSTOM OIL GUNSTOCK FINISH

    jeffprigge_2008_030332.jpg
     
  3. David McMillen

    David McMillen Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    1,019
    Brownells freight is higher than what the product cost.
     
  4. Unknown1

    Unknown1 Well-Known Member

    Joined:
    Nov 5, 2009
    Messages:
    3,402
  5. johnboy

    johnboy Member

    Joined:
    Jan 29, 1998
    Messages:
    725
    Not sure, may have, kind of looks like the product I used several years ago.The product I used had instructions that no sanding if another coat was applied in so many hours after the last coat. The finish turned out OK but the checker found that the finish chipped when he checkered it. I later learned that finishes either bond by mechanical method ( sanding)or chemical process. Sanding is part of the mechanical bonding of multi layers. If I used that product again I would disregard the no sanding method. Purchased from Brownells.
     
Thread Status:
Not open for further replies.