1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Gunsmith for 3200 Reminton work

Discussion in 'Shooting Related Threads' started by OLDREM31, Feb 11, 2012.

Thread Status:
Not open for further replies.
  1. OLDREM31

    OLDREM31 TS Member

    Joined:
    Feb 1, 2012
    Messages:
    5
    I live in the Tampa Bay Fl. area, and need some work done on a Remington 3200.
    Does anybody know of a gunsmith that can replace a firing pin?
    Bob Switzer
     
  2. ou.3200

    ou.3200 Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    1,490
    If you are inclined to work on your own gun you might consider getting a service manual off GunBroker or Ebay and replacing it yourself. Not too difficult if you follow the instructions and keep track of where each of the parts come from. I used a small plastic bag for each part and marked the location on the bag.
     
  3. curly1

    curly1 TS Member

    Joined:
    Feb 2, 2012
    Messages:
    6
    take pictures of it with a digital camera before disassembly and at various stages of disassembly. I have done this and sometimes it is helpful. Jeff
     
  4. OLDREM31

    OLDREM31 TS Member

    Joined:
    Feb 1, 2012
    Messages:
    5
    Thanks Jeff. Good idea.
    Bov
     
  5. OLDREM31

    OLDREM31 TS Member

    Joined:
    Feb 1, 2012
    Messages:
    5
    Thanks ou.3200, I have ordered the owners manual, but will find a copy of the service manual.
    Bob
     
  6. straightshooter1

    straightshooter1 Well-Known Member TS Supporters

    Joined:
    Jun 23, 2007
    Messages:
    1,933
    Sent you an email about a local gunsmith.

    Bob
     
  7. Ajax

    Ajax Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    2,446
    A firing pin is not hard to change but if any other work to be done to a 3200.

    Laibs-Gunsmithing

    Ajax
     
  8. gun fitter

    gun fitter TS Member

    Joined:
    Jan 29, 1998
    Messages:
    2,959
    lots but see when Lawrence Plynski will be at the Silver Dollar. His work is tops.
     
Thread Status:
Not open for further replies.
Search tags for this page

3200 gunsmithing