1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Gun Blueing

Discussion in 'Uncategorized Threads' started by mt, Sep 27, 2007.

Thread Status:
Not open for further replies.
  1. mt

    mt Member

    Joined:
    Jan 29, 1998
    Messages:
    246
    While this company is not on the East coast, they are highly regarded and I'm told they are very quick at turnaround. Might be worth a call.
    http://www.gunbluing.com/
     
  2. phirel

    phirel TS Member

    Joined:
    Jan 29, 1998
    Messages:
    9,556
    Gary- Ask around your local gun shops. Polishing the gun is the difficult part, dipping the parts in tanks is rather simple.

    Pat Ireland
     
  3. Big Jack

    Big Jack Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    1,735
    Location:
    Erie, Pa
    Gary, You have the difficult part done. Dunking them is easy. I chose to go the easy route. My 1100 Trap (Circa 1975) looked like it was dragged home behind the truck. I had it sand blasted and blued.. it looks like an "express" now. Installed new trap wood and it looks like a million bucks. And no reflections in a duck blind, but it almost looks too good to take hunting!

    Big Jack
     
  4. dennis (nj)

    dennis (nj) Guest

    So your going to keep this a secret ???
     
  5. atashooter

    atashooter Member

    Joined:
    Jan 29, 1998
    Messages:
    625
  6. whiz white

    whiz white Strong Supporter of Trapshooting Banned

    Joined:
    Jan 29, 1998
    Messages:
    4,771
    Location:
    Rapid City SD
    The best!

    Thanks for the spotted "," Tachyon.

    Whiz
     
  7. Big Az Al

    Big Az Al Well-Known Member

    Joined:
    Jun 2, 2006
    Messages:
    1,297
    Location:
    near Tucson Trap
    Kelso Gunsmithing, closer to wrong coast

    three week or less turn around.
     
  8. The Rock

    The Rock Active Member

    Joined:
    Jan 29, 1998
    Messages:
    1,491
    whiz

    He may be the best but his web site sucks big time. Doesn't work at my end anyway.

    All the Best.

    Rock

    Jim
     
  9. tachyon

    tachyon Member

    Joined:
    Jan 29, 1998
    Messages:
    671
    Whiz put a comma after the www, it should be a period. Try the link above.
     
Thread Status:
Not open for further replies.