1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Gualandi 1227 Wad reloading data

Discussion in 'Shooting Related Threads' started by vision976, May 13, 2009.

Thread Status:
Not open for further replies.
  1. vision976

    vision976 TS Member

    Joined:
    Apr 25, 2009
    Messages:
    2
    Have just received Gualandi 1227 wads from Grafs and haven't found any loading data. Anybody got some? I know they were designed to work with straight-wall cases like Cheddites, Fiocchi, Rio and Federals.

    Thanks,

    John
     
  2. goatskin

    goatskin TS Member

    Joined:
    Jun 24, 2009
    Messages:
    1,781
    Grafs should have sent you a loads flyer. It's not much, but is a start.

    Gualandi shows a 700-X load of 18.5gn and a Fed 209A, and that will give you a starting point. Whatever you're using now for your 7/8-1ox load should be fine, just back off a grain

    The Super G/G12xx/BRGxx are fairly efficient wads, similar to original Federal S0 & S3, with a single gas seal, although at the bottom instead of at the shot cup.

    Use with zero wad pressure, and you might have to go slow to bleed air.


    Bob
     
  3. goatskin

    goatskin TS Member

    Joined:
    Jun 24, 2009
    Messages:
    1,781
    There's more discussion over on SGW/reloading board.

    GS
     
Thread Status:
Not open for further replies.
Search tags for this page

gualandi loading data

,

gualandi reloading data

,
gualandi wads reloading data