1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

G-squared

Discussion in 'Shooting Related Threads' started by 13ga, Jun 27, 2012.

Thread Status:
Not open for further replies.
  1. 13ga

    13ga Member

    Joined:
    Jan 29, 1998
    Messages:
    52
    Have a BT99 with an older G-squared recoil set up. Is there any up and down adjustment in this unit?
    Thanks in advance
     
  2. BAD 303

    BAD 303 Active Member

    Joined:
    Apr 13, 2006
    Messages:
    3,544
    Should be up and down adjustable for sure and maybe side to side. The allen screw non top of the comb raise and lowers the comb but you have to make sure it is loose at the rear first.
     
  3. Ontario Chris

    Ontario Chris Member

    Joined:
    Feb 23, 2006
    Messages:
    437
    Location:
    NY Finger Lakes
    Another question on the same topic? If the comb is not adjustable side to side, is it possible to make it so? Would it be possible to make and install a different comb to accommodate side to side needs?

    Thanks,

    Chris
     
  4. superxjeff

    superxjeff Active Member

    Joined:
    Jan 29, 1998
    Messages:
    3,781
    yea.. Just send it to G-square and they will do it. Why tinker with a Plus 1000.00 dollar recoil device when the man who installed it in the first place is open for business?Jeff
     
  5. cf4952

    cf4952 Member

    Joined:
    Jan 29, 1998
    Messages:
    370
    Mike is extremely helpful, even if you bought the stock used. Give him a call.
    Good luck.
     
Thread Status:
Not open for further replies.