1. We have added the ability for anyone to 'bump' threads that they have created. This is mainly useful in the classifieds area where posters constantly bump for sale threads to bring it to the top. This allows them the ability to do that without having to clutter the thread with extra 'TTT' and 'Bump' type posts. To bump it, go inside your thread and click on 'Thread Tools' at the top, then select 'bump'. You can bump only once per 24 hour period.

    For more detailed information please see this post: Thread Bump Functionality.
    Dismiss Notice
  2. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

FS MX-15

Discussion in 'For Sale- Members only' started by Rocketdog, Mar 18, 2013.

Thread Status:
Not open for further replies.
  1. Rocketdog

    Rocketdog Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    549
    34",factory ct's,non backbored,non-ported,pull trigger,14 1/4 lop,cased,serial # 115XXX. 4200.00 4100.00
    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  2. pheasantsgalore

    pheasantsgalore Active Member

    Rating - 100%
    18   0   0

    Joined:
    Mar 10, 2007
    Messages:
    1,181
    Location:
    Kansas City area
    Is it possible to later add o/u barrels to this MX15, with additional trigger as I assume the trigger is for single barrel operation, right? Thanks, nice gun at a great price.
     
  3. Sport-Trap

    Sport-Trap Member

    Rating - 100%
    4   0   0

    Joined:
    Apr 24, 2011
    Messages:
    170
    Location:
    PA
    MX 15 is combo ready

    Just add o/u barrels
     
  4. Steve W

    Steve W Well-Known Member

    Rating - 95%
    24   1   0

    Joined:
    Jan 29, 1998
    Messages:
    5,116
    Location:
    Los Angeles
    MX-15 has standard O/U trigger group in it.
     
  5. plaw

    plaw Active Member

    0   0   0

    Joined:
    Jan 18, 2011
    Messages:
    666
    I don't think you could walk in any gun store and buy this gun for this price,someone is missing a good buy. I know i sure like mine.
     
  6. bkt514

    bkt514 Active Member

    Rating - 100%
    1   0   0

    Joined:
    Feb 24, 2009
    Messages:
    941
    Location:
    New Hampshire
    I bought my MX15 used. Added over/under barrels fitted by Giacamo's.
     
  7. Rocketdog

    Rocketdog Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    549
  8. straightshooter1

    straightshooter1 Well-Known Member TS Supporters

    0   0   0

    Joined:
    Jun 23, 2007
    Messages:
    1,934
    DB81 barrels are supposed to be the correct ones for the MX-15 (so you don't have to add/subtact washers). Some go on with no fitting, others apparently need just a bit of fit. Mike Battista has a nice set, asking 2k for them. I did not try them on my gun to see if they fit and gave the same sight picture however.

    This is certainly a nice gun and the price is, IMO, very good. I paid more for mine, though it had double release triggers.

    Bob
     
  9. Barry C. Roach

    Barry C. Roach Well-Known Member

    Rating - 100%
    1   0   0

    Joined:
    Jan 29, 1998
    Messages:
    9,209
    Location:
    Scottsdale, AZ
    DB81 OU's aren't a match to make an MX15 combo without having to add a lot more height to the comb and probably the need for taller pins.
     
  10. JGS

    JGS Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    216
    The best barrels to match-up with the MX15 are O/U barrels from a MX12/3. As far as required fitting goes, some adjustments to the timing of hammer cocking and ejector operation will probably be required, but that is easily done by a good Perazzi gunsmith. No adjustment to the comb is required when using the MX12/3 barrels. This setup creates a great combo for those that like lower height adjustable ribs. J.G.Sayle
     
  11. Rocketdog

    Rocketdog Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    549
  12. DustyOne60

    DustyOne60 Active Member

    0   0   0

    Joined:
    Feb 21, 2012
    Messages:
    492
    You have a PM
     
Similar Threads
  1. pjh
    Replies:
    3
    Views:
    1,418
  2. jayco32
    Replies:
    2
    Views:
    734
  3. PJ MX8
    Replies:
    4
    Views:
    1,677
  4. Bluzman98
    Replies:
    15
    Views:
    17,405
  5. Rocketdog
    Replies:
    11
    Views:
    3,383
Loading...
Thread Status:
Not open for further replies.