1. We have added the ability for anyone to 'bump' threads that they have created. This is mainly useful in the classifieds area where posters constantly bump for sale threads to bring it to the top. This allows them the ability to do that without having to clutter the thread with extra 'TTT' and 'Bump' type posts. To bump it, go inside your thread and click on 'Thread Tools' at the top, then select 'bump'. You can bump only once per 24 hour period.

    For more detailed information please see this post: Thread Bump Functionality.
    Dismiss Notice
  2. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

FS-beretta 390 money maker barrel

Discussion in 'For Sale- Members only' started by acss, Aug 24, 2012.

Thread Status:
Not open for further replies.
  1. acss

    acss Well-Known Member Supporting Vendor

    Rating - 100%
    40   0   0

    Joined:
    Feb 7, 2006
    Messages:
    5,982
    Location:
    rock port, mo
    forsale- beretta 390 30in money maker barrel-mobil choke- .740 bore, choke tube in barrel is .707= 33/1000 restriction-- like new- $475 + 15 shipping-- wally riebesell- 660-744-4115 cst
    [​IMG]

    [​IMG]
     
  2. acss

    acss Well-Known Member Supporting Vendor

    Rating - 100%
    40   0   0

    Joined:
    Feb 7, 2006
    Messages:
    5,982
    Location:
    rock port, mo
    most moneymakers are 3/8" taller than factory rib height-- poi is usually 80/20-- i can pattern it if you'd like- but i'm sure thats what it will be! if you get it and doesnt shoot what you like- send it back---wally
     
  3. acss

    acss Well-Known Member Supporting Vendor

    Rating - 100%
    40   0   0

    Joined:
    Feb 7, 2006
    Messages:
    5,982
    Location:
    rock port, mo
    yes i agree but if you ask jay or mike what is their "standard" heighth, they'll say 3/8 to 1/2in--- i will measure it vs a flat rib 390 barrel and post it--the monte carlo stock that was on this gun only had 2 washer shimms on the adj comb posts--sorry for the confusion
     
  4. acss

    acss Well-Known Member Supporting Vendor

    Rating - 100%
    40   0   0

    Joined:
    Feb 7, 2006
    Messages:
    5,982
    Location:
    rock port, mo
    OK- here we are with info(i've sold dozens of these, guess i got a lil rushed to post a forsale item)--
    the rib at chamber is 3/8in taller vs a flat rib barrel
    usually this will stack the beads w/a monte carlo trap stock unaltered

    POI looks like a strong 80/20
    it measures w/shot pattern density, approx 14in up and 4in below-
    not considering flyers! --
    i usually pull a lil to the right and up a bit when i squeeze the trigger for patterning--

    this is a very clean asnew barrel,with not much recoil as you probably expect
    [​IMG]
     
Thread Status:
Not open for further replies.