1. We have added the ability for anyone to 'bump' threads that they have created. This is mainly useful in the classifieds area where posters constantly bump for sale threads to bring it to the top. This allows them the ability to do that without having to clutter the thread with extra 'TTT' and 'Bump' type posts. To bump it, go inside your thread and click on 'Thread Tools' at the top, then select 'bump'. You can bump only once per 24 hour period.

    For more detailed information please see this post: Thread Bump Functionality.
    Dismiss Notice
  2. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

FS-303 28in wide rib-briley choked barrel -SOLD

Discussion in 'For Sale- Members only' started by acss, Sep 12, 2012.

Thread Status:
Not open for further replies.
  1. acss

    acss Well-Known Member Supporting Vendor

    Rating - 100%
    40   0   0

    Joined:
    Feb 7, 2006
    Messages:
    5,982
    Location:
    rock port, mo
    forsale- beretta 303 28in wide rib barrel - briley choke tube--this was a 30in cut down(professsinaly done) , has 2 3/4in chamber--very clean- $185 + 15 shipping--wally riebesell- 660-744-4115 cst --this will fit 303 and older models
    acss_2008_0303390.jpg

    acss_2008_0303391.jpg

    acss_2008_0303392.jpg

    acss_2008_0303393.jpg
     
  2. SCtrapshooter

    SCtrapshooter TS Member

    0   0   0

    Joined:
    Jul 16, 2010
    Messages:
    146
    Mornin Wally,

    Will this barrel still accept mobile chokes, or only Briley?

    Tom McBroom
     
  3. acss

    acss Well-Known Member Supporting Vendor

    Rating - 100%
    40   0   0

    Joined:
    Feb 7, 2006
    Messages:
    5,982
    Location:
    rock port, mo
    it is threaded for briley-- the reason for this (if you want to know) is when you get a factory beretta choked barrel, the threads are thick and spaced wider-beretta could do this as the barrel was thicker & swelled on the muzzle end. when you cut off a barrel back into the tube the wall is straight so you need fine threads for more of a bite into the barrel wall! the good part is that brileys longer tubes pattern very well!! and they arent outlandishly pxd to buy extras
     
  4. acss

    acss Well-Known Member Supporting Vendor

    Rating - 100%
    40   0   0

    Joined:
    Feb 7, 2006
    Messages:
    5,982
    Location:
    rock port, mo
    ttt
     
  5. acss

    acss Well-Known Member Supporting Vendor

    Rating - 100%
    40   0   0

    Joined:
    Feb 7, 2006
    Messages:
    5,982
    Location:
    rock port, mo
    still forsale
     
Thread Status:
Not open for further replies.