1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Flourescent front sight for Money Maker barrel

Discussion in 'Shooting Related Threads' started by rickk55, Oct 16, 2012.

Thread Status:
Not open for further replies.
  1. rickk55

    rickk55 Member

    Joined:
    Feb 4, 2006
    Messages:
    64
    Looking to put a flourescent front site on my moneymaker 390 barrel, any ideas? Magnetic or double sided tape? Which manuafacturer? Color? Would appreciate any ideas. thanks
     
  2. wireguy

    wireguy TS Member

    Joined:
    Jan 29, 1998
    Messages:
    3,715
    I would go with an electronic ballast as they are smaller and lighter than magnetic. Stay with a single T-6 lamp or your eyes might not be able to see anything at night. Bring lots of extension cord. You shouldn't need anything bigger than 16 gauge unless you will be more than 100' from your power source.
     
  3. Claymuncher

    Claymuncher Member

    Joined:
    Oct 31, 2011
    Messages:
    837
    WhatIdo........If you already have a plastic insert in your site go to a hobby shop and by a small jar or spray works just as good, of the bright fluorescent yellow green paint. Tell them you want it to stick to plastic, as they use it for plastic race car bodies. It sticks good, oil will not take it off and it is as bright as the ugly light sticks. Use a sharp toothpick to build it up on the site.

    CM
     
Thread Status:
Not open for further replies.