1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Federal Paper Hulls and sr7625 powder

Discussion in 'Shooting Related Threads' started by bling 27, Feb 26, 2012.

Thread Status:
Not open for further replies.
  1. bling 27

    bling 27 Member

    Joined:
    Sep 2, 2006
    Messages:
    126
    I can't find any loading data with 7625 and a federal paper hull. I want to load 1 1/8 oz of shot at 1225-1250fps. Any help would be appricated. Thanks, Wayne
     
  2. WTW

    WTW Member

    Joined:
    Jan 29, 1998
    Messages:
    257
    Bling, I have this in a little book I keep. I don't known where I found it but this is it.

    26.2 gr = 1240 fps

    I load this in the top gun hulls. Ted
     
  3. cubancigar2000

    cubancigar2000 Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    10,521
    Location:
    Idaho
    I load Fed papewrs with 7625. I wont give you my load ( dont believe in it and it is for 1 1/4 oz anyway) but if you fo go to IMR's web site it will give you what you want
     
  4. goatskin

    goatskin TS Member

    Joined:
    Jun 24, 2009
    Messages:
    1,781
    Bling, the "Formula" - if you wish - for loading FedPapers with a non-listed powder is to find the FGM-Plastic load you'd like, and add a ½ gn.

    Pressure is never an issue with 7625, and the chrono validates the "Formula."

    I load papers and 7625 with Bismuth for my Damascus guns and wildfowl. 7625 is good stuff.

    Bob
     
  5. dead on 4

    dead on 4 Well-Known Member

    Joined:
    Aug 4, 2009
    Messages:
    3,070
    Dupont loading manual 1977

    Federal paper 1-1/8 shot Winchester 209 primer, Winchester AA12 white wad & 27.5 grains SR7625 1220 fps @ 5700 psi

    If you to move up to 1265 fps and 6500 psi change the powder drop to 28.0 grains.

    Surfer
     
  6. bling 27

    bling 27 Member

    Joined:
    Sep 2, 2006
    Messages:
    126
    Thanks Guys ! You gave me the info I needed. Wayne
     
  7. Ifitfliesitdies

    Ifitfliesitdies Member

    Joined:
    Aug 29, 2007
    Messages:
    323
    Really like the 7625 in the Federal paper. Nice Soft shooting with good speed. Crush targets not the shooter!
     
  8. Dr.Longshot

    Dr.Longshot Banned Banned

    Joined:
    Jan 29, 1998
    Messages:
    5,722
    Closest I found was 27.0 grs 7625 1 1/8th oz w/Winchester primer, 12S3 wad.1260 fps

    GB
    DLS
     
Thread Status:
Not open for further replies.
Search tags for this page

4625 gun powder for military use

,

gun powder loads for a federal paper

,

imr 7625 federal papers

,

sr 7625 powder in stock