1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Fabarms chokes need help

Discussion in 'Shooting Related Threads' started by Dynokick189, Feb 7, 2009.

Thread Status:
Not open for further replies.
  1. Dynokick189

    Dynokick189 TS Member

    Joined:
    Jan 29, 1998
    Messages:
    80
    Just picked up a used 12ga Fabarms pump (is clad in Carbon fiber w/a carbon fiber ventilated sleeve on the barrel). I has an extended choke tube marked "IC 1/4 choke".
    Does anyone have a source for chokes for this gun, as well as a choke tube wrench?
    Tried a few on-line sites with no luck.
    Specifically looking for a turkey choke and wrench.
    Any help will be appreciated.
    Mike
     
  2. i_shoot

    i_shoot Member

    Joined:
    Jan 29, 1998
    Messages:
    434
    Trulock has them.

    i_shoot
     
  3. Sky Buster

    Sky Buster Sky Buster TS Supporters

    Joined:
    Jan 29, 1998
    Messages:
    2,977
    Location:
    Minnesota
    Briley's also....
     
  4. Dynokick189

    Dynokick189 TS Member

    Joined:
    Jan 29, 1998
    Messages:
    80
    Thanks folks, These chokes thread on the OUTSIDE of the barrel. I'll follow up on your recommedations.
    Most appreciated,
    Mike
     
Thread Status:
Not open for further replies.