1. We have added the ability for anyone to 'bump' threads that they have created. This is mainly useful in the classifieds area where posters constantly bump for sale threads to bring it to the top. This allows them the ability to do that without having to clutter the thread with extra 'TTT' and 'Bump' type posts. To bump it, go inside your thread and click on 'Thread Tools' at the top, then select 'bump'. You can bump only once per 24 hour period.

    For more detailed information please see this post: Thread Bump Functionality.
    Dismiss Notice
  2. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

F/S: Perazzi MX8 Top Single Bbl.& Forend REDUCED !

Discussion in 'For Sale- Members only' started by map@neo, Jul 28, 2010.

Thread Status:
Not open for further replies.
  1. map@neo

    map@neo Member

    0   0   0

    Joined:
    Apr 25, 2007
    Messages:
    814
    For sale is a Perazzi MX8 top single bbl and complete matching forend iron with wood. The barrel is 34" full choke and has a step, parallel rib. Serial number is 454xx. The forcing cone has been lengthened and the barrel has been ported. It appears to be "Seitz" type porting, but not stamped. Bore and choke are original. The forend is complete and serial number matches bbl. The original wood has a long fine crack from the bottom of release latch down to forend iron. It can be epoxied and refinished with a little work.There are NO dents or dings in the rib and it is structurally sound. Original blue shows wear only where wood was fitted against it. Balance of blue complete. No FFL required. Reduced to $1450. and shipped to lower 48. Thank you.

    map
    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  2. map@neo

    map@neo Member

    0   0   0

    Joined:
    Apr 25, 2007
    Messages:
    814
    up please^
     
  3. map@neo

    map@neo Member

    0   0   0

    Joined:
    Apr 25, 2007
    Messages:
    814
    up please^
     
  4. map@neo

    map@neo Member

    0   0   0

    Joined:
    Apr 25, 2007
    Messages:
    814
    up please^
     
  5. map@neo

    map@neo Member

    0   0   0

    Joined:
    Apr 25, 2007
    Messages:
    814
    up please ^
     
  6. sliverbulletexpress

    sliverbulletexpress TS Member

    0   0   0

    Joined:
    Jul 1, 2009
    Messages:
    2,645
    Nice barrel is that type3 ?
     
  7. map@neo

    map@neo Member

    0   0   0

    Joined:
    Apr 25, 2007
    Messages:
    814
    I belive it is type 2. It has the smaller forend lug. Not sure if type 3 have this lug.
     
  8. map@neo

    map@neo Member

    0   0   0

    Joined:
    Apr 25, 2007
    Messages:
    814
    up again please ^
     
Thread Status:
Not open for further replies.