1. We have added the ability for anyone to 'bump' threads that they have created. This is mainly useful in the classifieds area where posters constantly bump for sale threads to bring it to the top. This allows them the ability to do that without having to clutter the thread with extra 'TTT' and 'Bump' type posts. To bump it, go inside your thread and click on 'Thread Tools' at the top, then select 'bump'. You can bump only once per 24 hour period.

    For more detailed information please see this post: Thread Bump Functionality.
    Dismiss Notice
  2. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

F/S MEC Hyd Cylinder, Reconditioned

Discussion in 'For Sale- Members only' started by birddog1964, Dec 1, 2010.

Thread Status:
Not open for further replies.
  1. birddog1964

    birddog1964 TS Member

    0   0   0

    Joined:
    May 3, 2009
    Messages:
    466
    I have a MEC Hyd Cylinder that has been reconditioned with new seals for 125.00 shipped to your door. Just a note, as seen in pic these do have the screw off ends I stock the seals for these and rebuild them for 40.00 plus return shipping. If you have any questions, my # is 423-743-9233


    Note the cyl that is on base is also rebuild-able, parts in stock

    SOLD----SOLD---SOLD-NOTE>>>>>>>>>>>>> I have a 200+ count MEC auto primer feed for all 2 stage loaders, brand new in the box$ 60.00 shipped>>>>>>>>>>>>>>>>>>>>>>>>

    I will give a 6 month warranty on this cylinder and the cylinder's I rebuild, Knock on wood I have not had any problems with the cylinder's

    thanks
    lee
    [​IMG]

    [​IMG]

    <img src='/up
     
  2. birddog1964

    birddog1964 TS Member

    0   0   0

    Joined:
    May 3, 2009
    Messages:
    466
  3. Calkidd

    Calkidd Well-Known Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    2,325
    Location:
    Central Valley
    My cylinder looks just like the one you have in the photo, but the body on mine is brass. Is this one brass too and will mine being brass make a difference in the rebuild?

    Bryan
     
  4. birddog1964

    birddog1964 TS Member

    0   0   0

    Joined:
    May 3, 2009
    Messages:
    466
    Bryan,

    The body of this cylinder is brass too, It doesn't make any difference if it is brass or a steel cylinder, As long as it has no dents in the sides of the cylinder making it bypass you are fine. I have seen this on both brass and steel. I hope this helps.

    thanks
    lee
     
  5. birddog1964

    birddog1964 TS Member

    0   0   0

    Joined:
    May 3, 2009
    Messages:
    466
  6. eyegoods

    eyegoods TS Member

    0   0   0

    Joined:
    Jan 14, 2010
    Messages:
    104
  7. birddog1964

    birddog1964 TS Member

    0   0   0

    Joined:
    May 3, 2009
    Messages:
    466
  8. birddog1964

    birddog1964 TS Member

    0   0   0

    Joined:
    May 3, 2009
    Messages:
    466
  9. birddog1964

    birddog1964 TS Member

    0   0   0

    Joined:
    May 3, 2009
    Messages:
    466
  10. Calkidd

    Calkidd Well-Known Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    2,325
    Location:
    Central Valley
    Lee, PM me your address and I will get mine out to you.

    Bryan.
     
  11. birddog1964

    birddog1964 TS Member

    0   0   0

    Joined:
    May 3, 2009
    Messages:
    466
  12. birddog1964

    birddog1964 TS Member

    0   0   0

    Joined:
    May 3, 2009
    Messages:
    466
  13. birddog1964

    birddog1964 TS Member

    0   0   0

    Joined:
    May 3, 2009
    Messages:
    466
  14. birddog1964

    birddog1964 TS Member

    0   0   0

    Joined:
    May 3, 2009
    Messages:
    466
  15. atadams77

    atadams77 Member

    0   0   0

    Joined:
    Sep 24, 2010
    Messages:
    99
    Location:
    Texas
    sent pm for the feeder..thanks!
     
  16. birddog1964

    birddog1964 TS Member

    0   0   0

    Joined:
    May 3, 2009
    Messages:
    466
    primer feed sold.

    thanks
    lee
     
  17. emathu11

    emathu11 Member

    0   0   0

    Joined:
    Feb 21, 2010
    Messages:
    38
    Is the reconditioned cylinder sold ?
    Ed Mathurin
     
  18. birddog1964

    birddog1964 TS Member

    0   0   0

    Joined:
    May 3, 2009
    Messages:
    466
    Ed,

    No I still have 2 hyd cyl avl at this time, my # 423-743-9233.

    thanks
    lee
     
  19. birddog1964

    birddog1964 TS Member

    0   0   0

    Joined:
    May 3, 2009
    Messages:
    466
  20. leftex

    leftex Active Member

    Rating - 100%
    13   0   0

    Joined:
    Jan 29, 1998
    Messages:
    1,172
    Location:
    South of Dallas
    Lee,

    I have cylinder like the one pictured on the base. I would like to have it rebuilt. Please pm your info and I will get it on it's way.

    Thanks,
    Wayne
     
Thread Status:
Not open for further replies.