1. We have added the ability for anyone to 'bump' threads that they have created. This is mainly useful in the classifieds area where posters constantly bump for sale threads to bring it to the top. This allows them the ability to do that without having to clutter the thread with extra 'TTT' and 'Bump' type posts. To bump it, go inside your thread and click on 'Thread Tools' at the top, then select 'bump'. You can bump only once per 24 hour period.

    For more detailed information please see this post: Thread Bump Functionality.
    Dismiss Notice
  2. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

F/S Ljutic Mono

Discussion in 'For Sale- Members only' started by Old Texas Marine, Jun 30, 2010.

Thread Status:
Not open for further replies.
  1. Old Texas Marine

    Old Texas Marine Member

    0   0   0

    Joined:
    Apr 6, 2008
    Messages:
    529
    I am selling my beloved Ljutic Mono Gun. During the next few years I will be traveling (some international) and unfortunately won’t be shooting.

    She is a 1976 vintage gun, 34” barrel length with a .740 bore and .705 choke. No one has touched the barrel or choke and the rings are intact. She won me some bling at State and at Zone last year and I hate to sell her, but reality has raised its ugly head.

    The stock has a Counter Coil recoil device, adjustable butt plate and four way adjustable comb. LOP is 14 7/8' over a 1 1/2" Gooey Pad. It comes with a hard case. She will eject Estates, Gun Clubs (factory and reloads), but not the steel hulled Winchesters. Of course, all brass hulls are fine.

    Last October I had Doug Braker of Doug’s Gun Shop do his magic on the receiver with a nickel-plated finish. He used a titanium nitride plating to put a gold like finish on the trigger, trigger housing retainer pin, forearm release button and the inertial lock button. I also replaced the firing pin and spring with the new design and replaced the inertial lock spring and hammer spring.

    I have more photos than the ones below that I can email. I am asking $2,900.00. Thanks for looking.

    HBT


    [​IMG]

    [​IMG]

    [​IMG]
     
  2. tumbleweed

    tumbleweed Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    273
    I'll give this one a bump. Very nice looking hardware. The gold and nickel plating looks great on this gun.

    More info please......

    Is there any cast in the stock? Palm swell?

    Pull or release trigger?

    Any porting on the barrel?

    Any noticeable slack in the hinge pin or locking block?

    Thanks!
     
  3. Old Texas Marine

    Old Texas Marine Member

    0   0   0

    Joined:
    Apr 6, 2008
    Messages:
    529
    Tumbleweed,

    The stock is neutral and there is no palm swell. The wrist is very full, which I prefer because I have very long hands. I had a Citori Trap (that I sold to a TS.com member) that I never liked due to the small wrist.

    In any case it is a pull trigger that breaks like a fine rifle at 40 oz. and the barrel is not ported. Makes for a better neighbor and easier cleaning.

    The gun is extremely tight. The inertial lock (locking block) spring is new and one must push down on the barrel/forearm to open.

    I can provide photos of the stock cast and wrist if you wish.

    HBT
    realtee@earthlink.net
    817-271-9699
     
  4. Old Texas Marine

    Old Texas Marine Member

    0   0   0

    Joined:
    Apr 6, 2008
    Messages:
    529
    Guys,

    The Ljutic is sold pending funds.

    Thank all of you who looked and/or responded.

    HBT
     
Thread Status:
Not open for further replies.