1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

F/S John Hall blk.2gun case

Discussion in 'Uncategorized Threads' started by TIPPEDWAD, Jun 2, 2007.

Thread Status:
Not open for further replies.
  1. TIPPEDWAD

    TIPPEDWAD TS Member

    Joined:
    Apr 24, 2006
    Messages:
    59
    Bill: Will that case take 34"bbl bt-99 and 32" xt over & under?
    Thanks,
    Whit H
     
  2. foghorn220

    foghorn220 Active Member

    Joined:
    Jan 29, 1998
    Messages:
    2,535
    tippedwad

    I can answer that question because I have the same case im sure and I have 2- 34" single barrels and 1 -32" O/U barrel in mine all of the 2 gun cases I have seen has been the same by the way it does seem like a good price that is what I gave for my used one about a year ago.

    Foghorn
     
  3. Kolar Dan

    Kolar Dan Member

    Joined:
    Jan 29, 1998
    Messages:
    255
    I have one I'll part with. It will haol 2 receivers and 2 to 3 34" barrels. It's in good shape except the handle broke about a week ago. Haven't had time to find one for it. If interested contact me at my e-mail.
    Sonny Daniels
     
  4. teleskier

    teleskier Member

    Joined:
    Jan 26, 2007
    Messages:
    237
    My handle broke this last week too. The plastic cracked so I am going to try and use duct tape to hold it together or else get another Warwick case.
     
  5. foghorn220

    foghorn220 Active Member

    Joined:
    Jan 29, 1998
    Messages:
    2,535
    teleskier
    Are you saying the handle it self cracked or is it the pieces that holds it to the case.
    If it is the handle then I got one.



    Email me

    foggy
     
  6. lvshooter

    lvshooter TS Member

    Joined:
    Jan 29, 1998
    Messages:
    88
    There is a thread on here where you can get a new John hall gun case. 2 receivers and 3 barrels.
     
  7. foghorn220

    foghorn220 Active Member

    Joined:
    Jan 29, 1998
    Messages:
    2,535
    trapper711
    I saw it but there is a lot of people that just needs parts for them and don't want to buy a new one.

    by the way im sure they are the new types ruff grained instead of the old smooth slick plastic cases aren't they.

    Myself I would rather have a used old original one instead.

    Ok here is gene Sears info below for the new ones and the thread you was talking about at the top.

    Gene Sears Supply, 2003 S Shepard, El Reno, Oklahoma 73036 Phone 800-522-3314 or 405-262-2647


    Foghorn220
     
  8. foghorn220

    foghorn220 Active Member

    Joined:
    Jan 29, 1998
    Messages:
    2,535
    MGM here is what the old slick ones looked like.

    <a href="http://photobucket.com" target="_blank">[​IMG]</a>

    Ok here is the inside with my 3 barrels 2 are 34" and 1 is 32" O/U.noticed behind the black divider is where the 2 gun recievers are stored.


    <a href="http://photobucket.com" target="_blank">[​IMG]</a>


    Ok here is a view of it with me holding the divider up to show boths sides.

    <a href="http://photobucket.com" target="_blank">[​IMG]</a>

    the little rubber o straps is what holds the divider closed and seperates the 2 sections.

    Since I have only 1 reciever then I just used the other side for the plactic container with my grease and other small stuff but it has a strap to hold another reciever.
    <a href="http://photobucket.com" target="_blank">[​IMG]</a>


    These are the most compact cases made for a 2 gun set and 3 barrels that I have ever seen.


    foggy
     
  9. lvshooter

    lvshooter TS Member

    Joined:
    Jan 29, 1998
    Messages:
    88
    I have some odds and ends for John Hall cases but no handles. Maybe I can help. let me know and will help if I can
     
  10. Dave P

    Dave P TS Supporters TS Supporters

    Joined:
    Jan 29, 1998
    Messages:
    2,512
    Location:
    Canton, Il.
    Teleskier: Try some two part epoxy instead.
     
Thread Status:
Not open for further replies.
Search tags for this page

john hall plastic gun case

,

john hall shotgun case