1. We have added the ability for anyone to 'bump' threads that they have created. This is mainly useful in the classifieds area where posters constantly bump for sale threads to bring it to the top. This allows them the ability to do that without having to clutter the thread with extra 'TTT' and 'Bump' type posts. To bump it, go inside your thread and click on 'Thread Tools' at the top, then select 'bump'. You can bump only once per 24 hour period.

    For more detailed information please see this post: Thread Bump Functionality.
    Dismiss Notice
  2. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

F/S Cole 390 Trigger

Discussion in 'For Sale- Members only' started by g7777777, Nov 29, 2009.

Thread Status:
Not open for further replies.
  1. g7777777

    g7777777 TS Supporters TS Supporters

    Rating - 100%
    6   0   0

    Joined:
    Jan 29, 1998
    Messages:
    9,353
    what is the advantage of this trigger?

    thanks

    Gene
     
  2. kolartarget

    kolartarget Member

    0   0   0

    Joined:
    Feb 7, 2009
    Messages:
    79
    will this fit a 391
     
  3. Tron

    Tron Supporting Vendor Supporting Vendor

    Rating - 100%
    2   0   0

    Joined:
    Jan 29, 1998
    Messages:
    6,666
    Yes, it will fit a 391 and it's a superior trigger. The trigger blade is about 1/4" further toward the muzzle though.
     
  4. kolartarget

    kolartarget Member

    0   0   0

    Joined:
    Feb 7, 2009
    Messages:
    79
    Tron I have a stock off of a 391 tekny's I would be willing to trade.
     
  5. Tron

    Tron Supporting Vendor Supporting Vendor

    Rating - 100%
    2   0   0

    Joined:
    Jan 29, 1998
    Messages:
    6,666
    I may just do that if that were my trigger.
     
  6. Dickgshot

    Dickgshot Well-Known Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    3,675
    Word of caution - at least from my experience. The 390 trigger is not an exact fit for the 391. It's not important that the edge of the trigger assembly doesn't match up exactly with the receiver - that's a cosmetic thing that you wouldn't even notice.

    However, I had a 303 trigger (which I assume is exactly the same as the 390 trigger-tell me if I'm wrong.) It fit my 391, which is a few years old, just fine - but my friend Danny had an almost new 391 and the trigger assembly was too wide to fit in the receiver.

    Just as the trigger assembly is hard to take in and out of a new 391, but eventually wears in; I think that the 390 might be too wide to fit in a new Teknys - at least without some fitting.
     
  7. kolartarget

    kolartarget Member

    0   0   0

    Joined:
    Feb 7, 2009
    Messages:
    79
    will this fit a 391
     
  8. Tron

    Tron Supporting Vendor Supporting Vendor

    Rating - 100%
    2   0   0

    Joined:
    Jan 29, 1998
    Messages:
    6,666
    Yes, it will fit a 391 and it's a superior trigger. The trigger blade is about 1/4" further toward the muzzle though.
     
  9. kolartarget

    kolartarget Member

    0   0   0

    Joined:
    Feb 7, 2009
    Messages:
    79
    Tron I have a stock off of a 391 tekny's I would be willing to trade.
     
  10. Tron

    Tron Supporting Vendor Supporting Vendor

    Rating - 100%
    2   0   0

    Joined:
    Jan 29, 1998
    Messages:
    6,666
    I may just do that if that were my trigger.
     
  11. Dickgshot

    Dickgshot Well-Known Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    3,675
    Word of caution - at least from my experience. The 390 trigger is not an exact fit for the 391. It's not important that the edge of the trigger assembly doesn't match up exactly with the receiver - that's a cosmetic thing that you wouldn't even notice.

    However, I had a 303 trigger (which I assume is exactly the same as the 390 trigger-tell me if I'm wrong.) It fit my 391, which is a few years old, just fine - but my friend Danny had an almost new 391 and the trigger assembly was too wide to fit in the receiver.

    Just as the trigger assembly is hard to take in and out of a new 391, but eventually wears in; I think that the 390 might be too wide to fit in a new Teknys - at least without some fitting.
     
  12. redhawk

    redhawk Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    454
    You have a PM
     
  13. claybrdr

    claybrdr Well-Known Member

    Rating - 100%
    3   0   0

    Joined:
    Jan 29, 1998
    Messages:
    3,269
    I sent one too. Guess he can't turn it on.
     
Thread Status:
Not open for further replies.
Search tags for this page

rich cole trigger assembly 390