1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

F/S...BERETTA 303 W/SPECIAL TRAP BARREL!!!!!!!!!!!

Discussion in 'Uncategorized Threads' started by bgf, Jul 26, 2008.

Thread Status:
Not open for further replies.
  1. bgf

    bgf Active Member

    Joined:
    Jan 29, 1998
    Messages:
    1,589
    Location:
    Prescott Valley, Arizona
    I have a 303 Beretta with 30” Special Trap barrel. Barrel is flat rib with porting and comes with three AnglePort tubes…a 20, 25 & 30 with a .725 bore. LOP is 14 ¼ “ over a red 5/8 inch pad. Buttstock and forearm do not match. Butt is flat and forearm is high gloss…not to bad thou. Handling marks on stock. Hair line scratch on left side of frame as seen in pic. Overall bluing is very good except for the scratch. Forearm cap is a Eyster 4 oz. weight replacement. Brass mid-center bead and white front bead. More pics upon request. Would like to get $550 plus $25 ship/ins. to your FFL. Use PM or e-mail addie above…drop the XXs. Bernie UPDATED ON 7.28.08

    <a href="http://smg.photobucket.com/albums/v355/bgf123/?action=view¤t=4.jpg" target="_blank">[​IMG]</a>

    <a href="http://smg.photobucket.com/albums/v355/bgf123/?action=view¤t=9.jpg" target="_blank">[​IMG]</a>

    <a href="http://smg.photobucket.com/albums/v355/bgf123/?action=view¤t=7.jpg" target="_blank">[​IMG]</a>

    <a href="http://smg.photobucket.com/albums/v355/bgf123/?action=view¤t=5.jpg" target="_blank">[​IMG]</a>

    <a href="http://smg.photobucket.com/albums/v355/bgf123/?action=view¤t=2.jpg" target="_blank">[​IMG]</a>

    <a href="http://smg.photobucket.com/albums/v355/bgf123/?action=view¤t=8.jpg" target="_blank">[​IMG]</a>

    <a href="http://smg.photobucket.com/albums/v355/bgf123/?action=view¤t=6.jpg" target="_blank">[​IMG]</a>
     
  2. claybrdr

    claybrdr Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    3,262
    Nice gun but not Angle Porting. Angle Porting looks just like the ports on the choke in the gun.

    I've never seen the words "Berben Corporation" on a Beretta barrel, not that it matters.
     
  3. bgf

    bgf Active Member

    Joined:
    Jan 29, 1998
    Messages:
    1,589
    Location:
    Prescott Valley, Arizona
    clay...

    That is what I was told regarding the porting from the gentleman that I got the gun. Took it in on trade...The porting looks professionally done.

    Bernie
     
  4. berettaman7

    berettaman7 TS Member

    Joined:
    Jan 29, 1998
    Messages:
    644
    If I didnt already have two A303 I would buy this one too right now!.

    Berettaman7
     
  5. claybrdr

    claybrdr Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    3,262
    I like it because it has the Sporting forearm instead of the ugly looking ones with the "hump". Its an excellent buy for that price.
     
  6. BAD 303

    BAD 303 Active Member

    Joined:
    Apr 13, 2006
    Messages:
    3,544
    Is this barrel a true 30" barrel or 29 1/2"? Does it have mobil choke threads or another choke system? Thanks
     
  7. bgf

    bgf Active Member

    Joined:
    Jan 29, 1998
    Messages:
    1,589
    Location:
    Prescott Valley, Arizona
    Bad...

    I would have to measure the barrel off the gun. I did not do that. As far as the tubes are concerned, I am sure they are AnglePort and not Mobil as the threads are quite wide.

    Bernie
     
  8. art g

    art g Member

    Joined:
    Jan 29, 1998
    Messages:
    312
    Berben Corporation was the US importer for Beretta many years ago....
     
  9. Dickgshot

    Dickgshot Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    3,673
    There was an importer before Galef?
     
  10. bgf

    bgf Active Member

    Joined:
    Jan 29, 1998
    Messages:
    1,589
    Location:
    Prescott Valley, Arizona
    UPDATE:

    I found the other choke...it comes with three not two...20, 25 & 30 with a .725 bore designation. Also, the porting is not AnglePort but is a professional job...don't know who did it. I have updated the original post.

    Thanks,
    Bernie
     
  11. bgf

    bgf Active Member

    Joined:
    Jan 29, 1998
    Messages:
    1,589
    Location:
    Prescott Valley, Arizona
    Got some offers of trades. I will consider them. Would consider a S&W .38 K-frame or a Kimber .45. Or?????????? Drop the XXs.

    Bernie
     
  12. bgf

    bgf Active Member

    Joined:
    Jan 29, 1998
    Messages:
    1,589
    Location:
    Prescott Valley, Arizona
    Let's make a deal!!!!!!!!
     
  13. bgf

    bgf Active Member

    Joined:
    Jan 29, 1998
    Messages:
    1,589
    Location:
    Prescott Valley, Arizona
    TTT
     
Thread Status:
Not open for further replies.