Hello Gents,
I have for you today a 12 gauge Benelli Nova pump-action shotgun with a boatload of extras. The gun itself has about 250 rounds through it, and was used mainly for home defense and general plinking.
The first extra is a Carlson’s 18-1/2 inch 4140 steel barrel. The barrel has a ramped front sight that is florescent orange, as well as a Cylinder flush screw choke tube. The barrel is in essentially new condition; only maybe 25 rounds total through it.
The second add on is a Carlson’s 7-round magazine tube extension.
Thirdly, I have added a Velcro side-saddle shell holder. The Velcro side-saddle holds 5 rounds, and I also have a Tac-Star shell holder that bolts to the side of the gun that I will throw in as well. Unfortunately I lost the extended screws needed to hold the Tac-Star holder, but I imagine they can be ordered from the company if you wish to install it.
The fourth addition is a Limbsaver recoil pad installed in lieu of the factory pad.
Finally, I have installed a Magpul single-point sling attachment point that accepts the tactical sling of your choice.
The only real issue with this gun are the surface marks on the right side of the polymer receiver. I had some issues when I originally installed the Tac-Star shell holder, so I (stupidly) used some pliers to help things along. In doing so I managed to make some scrapes around both screw holes on the right side of the receiver. These scrapes are purely cosmetic, and I have taken several pictures to highlight the condition of the receiver.
The cost to set up a kit like this today would run you right around $700 (trust me, I added it up ). Taking into account that it is used, as well as the condition, I am offering the full package for $525 shipped CONUS. If you are interested, please PM or email Timothyk88@juno.com
Thanks for looking!
-Tim
<a href="http://s435.photobucket.com/albums/qq74/Tekkie/?action=view¤t=shotgun6.jpg" target="_blank">
</a>
<a href="http://s435.photobucket.com/albums/qq74/Tekkie/?action=view¤t=shotgun9.jpg" target="_blank">
</a>
<a href="http://s435.photobucket.com/albums/qq74/Tekkie/?action=view¤t=shotgun8.jpg" target="_blank">
</a>
<a href="http://s435.photobucket.com/albums/qq74/Tekkie/?action=view¤t=shotgun7.jpg" target="_blank">
</a>
<a href="http://s435.photobucket.com/albums/qq74/Tekkie/?action=view¤t=shotgun3.jpg" target="_blank">
</a>
<a href="http://s435.photobucket.com/albums/qq74/Tekkie/?action=view¤t=shotgun11.jpg" target="_blank">
</a>
<a href="http://s435.photobucket.com/albums/qq74/Tekkie/?action=view¤t=shotgun4.jpg" target="_blank">
</a>
<a href="http://s435.photobucket.com/albums/qq74/Tekkie/?action=view¤t=shotgun10.jpg" target="_blank">
</a>
<a href="http://s435.photobucket.com/albums/qq74/Tekkie/?action=view¤t=shotgun2.jpg" target="_blank">
</a>
<a href="http://s435.photobucket.com/albums/qq74/Tekkie/?action=view¤t=shotgun1.jpg" target="_blank">
</a>
I have for you today a 12 gauge Benelli Nova pump-action shotgun with a boatload of extras. The gun itself has about 250 rounds through it, and was used mainly for home defense and general plinking.
The first extra is a Carlson’s 18-1/2 inch 4140 steel barrel. The barrel has a ramped front sight that is florescent orange, as well as a Cylinder flush screw choke tube. The barrel is in essentially new condition; only maybe 25 rounds total through it.
The second add on is a Carlson’s 7-round magazine tube extension.
Thirdly, I have added a Velcro side-saddle shell holder. The Velcro side-saddle holds 5 rounds, and I also have a Tac-Star shell holder that bolts to the side of the gun that I will throw in as well. Unfortunately I lost the extended screws needed to hold the Tac-Star holder, but I imagine they can be ordered from the company if you wish to install it.
The fourth addition is a Limbsaver recoil pad installed in lieu of the factory pad.
Finally, I have installed a Magpul single-point sling attachment point that accepts the tactical sling of your choice.
The only real issue with this gun are the surface marks on the right side of the polymer receiver. I had some issues when I originally installed the Tac-Star shell holder, so I (stupidly) used some pliers to help things along. In doing so I managed to make some scrapes around both screw holes on the right side of the receiver. These scrapes are purely cosmetic, and I have taken several pictures to highlight the condition of the receiver.
The cost to set up a kit like this today would run you right around $700 (trust me, I added it up ). Taking into account that it is used, as well as the condition, I am offering the full package for $525 shipped CONUS. If you are interested, please PM or email Timothyk88@juno.com
Thanks for looking!
-Tim
<a href="http://s435.photobucket.com/albums/qq74/Tekkie/?action=view¤t=shotgun6.jpg" target="_blank">
<a href="http://s435.photobucket.com/albums/qq74/Tekkie/?action=view¤t=shotgun9.jpg" target="_blank">
<a href="http://s435.photobucket.com/albums/qq74/Tekkie/?action=view¤t=shotgun8.jpg" target="_blank">
<a href="http://s435.photobucket.com/albums/qq74/Tekkie/?action=view¤t=shotgun7.jpg" target="_blank">
<a href="http://s435.photobucket.com/albums/qq74/Tekkie/?action=view¤t=shotgun3.jpg" target="_blank">
<a href="http://s435.photobucket.com/albums/qq74/Tekkie/?action=view¤t=shotgun11.jpg" target="_blank">
<a href="http://s435.photobucket.com/albums/qq74/Tekkie/?action=view¤t=shotgun4.jpg" target="_blank">
<a href="http://s435.photobucket.com/albums/qq74/Tekkie/?action=view¤t=shotgun10.jpg" target="_blank">
<a href="http://s435.photobucket.com/albums/qq74/Tekkie/?action=view¤t=shotgun2.jpg" target="_blank">
<a href="http://s435.photobucket.com/albums/qq74/Tekkie/?action=view¤t=shotgun1.jpg" target="_blank">