1. We have added the ability for anyone to 'bump' threads that they have created. This is mainly useful in the classifieds area where posters constantly bump for sale threads to bring it to the top. This allows them the ability to do that without having to clutter the thread with extra 'TTT' and 'Bump' type posts. To bump it, go inside your thread and click on 'Thread Tools' at the top, then select 'bump'. You can bump only once per 24 hour period.

    For more detailed information please see this post: Thread Bump Functionality.
    Dismiss Notice
  2. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

F/S $100 release for Rem. 1100 (SPF)

Discussion in 'For Sale- Members only' started by mag410, Feb 15, 2012.

Thread Status:
Not open for further replies.
  1. mag410

    mag410 Active Member

    Rating - 100%
    1   0   0

    Joined:
    Jan 29, 1998
    Messages:
    828
    Location:
    NE Mississippi
    Nick,

    You guess is correct. The pins sticking out of the hammer will not pass through the legs of the link (fork). It looks like somebody had some 870 release parts and tried to install on an 1100 trigger plate.

    What you have is basically a collection of mismatched parts.

    Michael Goines
     
  2. motordoctor

    motordoctor Shoji Tabuchi in Branson

    Rating - 100%
    20   0   0

    Joined:
    Jan 29, 1998
    Messages:
    3,687
    Location:
    ohio
    It is NOT a schwab as per the tag. His triggers were all stamped with his name and used a hook to pull back on the sear. They also had a release that unlatched the release part that is from an 870
     
  3. nanuk

    nanuk TS Supporters TS Supporters

    Rating - 100%
    8   0   0

    Joined:
    Jan 29, 1998
    Messages:
    579
    Location:
    Florida
    I had a trigger just like the one pictured. Mine was a spears release (old style)--which required a "special" link (fork)--which is no longer available.
    I was told to remove the stud on the hammer and it becomes a "pull" trigger.
    I did remove it and it worked fine.
    regards
    Bob
     
  4. skeet_man

    skeet_man Well-Known Member

    Rating - 100%
    11   0   0

    Joined:
    Jan 29, 1998
    Messages:
    10,528
    Location:
    Rochester, NY
    This would also work in a Remington 58, which doesn't not have the link.
     
Thread Status:
Not open for further replies.