1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

e'mail for addarib?

Discussion in 'Shooting Related Threads' started by skeeter1956, Feb 2, 2012.

Thread Status:
Not open for further replies.
  1. skeeter1956

    skeeter1956 Member

    Joined:
    Mar 14, 2011
    Messages:
    97
    e

    does anyone have an e'mail address for addarib? the one on their site keeps bouncing back to me. thanks in advance des
     
  2. ScottEslick

    ScottEslick Member

    Joined:
    Aug 5, 2009
    Messages:
    351
    Location:
    Waynesboro, PA
    Give them a call, that works.

    Scott
     
  3. kraiza

    kraiza Active Member

    Joined:
    Sep 17, 2007
    Messages:
    1,492
    Has any one that bought one have trouble with it. I had go two from them and both were bent by 1/16" to the right.
    I'm working with them now on what to do.
    If I install it I'm afrid the tape or glue will not set up fast enough to keep it stright.
    If someone has a fix let me know.
     
  4. slugbug1

    slugbug1 Member

    Joined:
    Jan 29, 1998
    Messages:
    803
    Mine was bent slightly to the right as well, but after I stuck it on it followed the rib and straightened out. That tape is really sticky. GaryL.
     
  5. Jim Bradbury

    Jim Bradbury Member

    Joined:
    Apr 26, 2010
    Messages:
    428
    Location:
    Buckley Washington
    I did not have any trouble with the rib. After three attempts and not receiving the correct post for the comb. I finally pulled the add-a-rib off and eventually sold the gun.
    Jim Bradbury
     
  6. $$$SHTR

    $$$SHTR Member

    Joined:
    Jan 29, 1998
    Messages:
    756
    Try these. Best add a rib on the market. Clamps to the side of existing rib. Easy on, easy off. Great workmanship.

    Tomas
     
  7. whiz white

    whiz white Strong Supporter of Trapshooting Banned

    Joined:
    Jan 29, 1998
    Messages:
    4,771
    Location:
    Rapid City SD
    Ray Braun is the owner, and a helluva great gentleman.

    Try this email: <i>rbraun1@aol.com</i>

    He owns a large machining operation where they make those roll down awnings for motors homes, etc. He's a shooter, so he really gotten into the trapshooting related business.

    There is a sales e-mail address at the above link. Click it.

    Whiz
     
  8. kraiza

    kraiza Active Member

    Joined:
    Sep 17, 2007
    Messages:
    1,492
    I will try to install the rib by walking out the curve from one end to the other. I think it will work.
     
  9. skeeter1956

    skeeter1956 Member

    Joined:
    Mar 14, 2011
    Messages:
    97
    thanks whiz, i will try that address today, would give ray a call but i am in australia and the call cost is a bit expensive. i am trying to get an addarib for my son's dt10. cheers des
     
  10. 682LINY

    682LINY Member

    Joined:
    Aug 14, 2006
    Messages:
    967
    Ray is on winter hours,,at the shop a lot less,,, may be at shot show,,, and he is one of the good guys
     
Thread Status:
Not open for further replies.