1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

easiest way to remove mainsprings from rem 3200?

Discussion in 'Shooting Related Threads' started by skeet_man, May 8, 2009.

Thread Status:
Not open for further replies.
  1. skeet_man

    skeet_man Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    10,530
    Location:
    Rochester, NY
    Any thoughts? Looks kinda complicated....
     
  2. ou.3200

    ou.3200 Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    1,490
    With the hammer cocked slip a pin through the hole in the rear of the rod that is in the center of the spring and let the hammer down. The spring and rod will then lift out. Make sure the pin is strong enough to hold the spring tension.
     
  3. skeet_man

    skeet_man Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    10,530
    Location:
    Rochester, NY
    That makes sense, thanks a bunch!! That will end up being ALOT easier than the way I thought to take them out.

    Thanks again

    As I always say, ts.com, the single greatest wealth of shooting knowledge on the internet!
     
Thread Status:
Not open for further replies.