1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

E powder recipes

Discussion in 'Shooting Related Threads' started by kfen, Sep 4, 2013.

  1. kfen

    kfen Member

    Joined:
    May 28, 2011
    Messages:
    39
    Location:
    Memphis Tn
    I need some help with recipes for Remington sts ,Cheddite primers with E 3 Alliant powder. I have thousands of Cheddite primers. I was loading Solo 1000 but was unable to find so I purchased Some e3 at the grand. All the reloading data only gives Remington 209 primers. I contacted Alliant but they have not responded back yet.
     
  2. zzt

    zzt Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    3,462
    Location:
    SE PA
    Lyman's manual only shows loads for STS209 or W209 primers. Sorry.
     
  3. sterlingworth

    sterlingworth Active Member

    Joined:
    Mar 16, 2010
    Messages:
    787
    I've swapped out cheddites for winchester 209 many times,and if your not running max pressures I see no problems.I use chedd's and win's when I load 700x and all is good.Just saying...Ray
     
  4. ironhead

    ironhead Member

    Joined:
    Apr 30, 2012
    Messages:
    85
    Location:
    Butler Ky
    you can use the remington primer data for cheddite primers. I have already talked to Ben from allaint.that is what he will tell you. 16.5 grains of E3, fig8,and cheddite primer in sts hull is a good load
    Mike Ryan