1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Dwight Angel-Midway, Fla.

Discussion in 'Off Topic Threads' started by POWDER RIVER, Aug 14, 2013.

  1. POWDER RIVER

    POWDER RIVER TS Member

    Joined:
    Jan 29, 1998
    Messages:
    53

    [​IMG]


    I bought this parts gun from Gun Broker, the gun

    was described as "what you see is what you get".

    When the gun arrived the receiver was empty and

    after requesting the bolt as shown in the picture,

    I was told there never was a bolt and only an empty

    receiver. When I look at the picture I see a bolt and a extractor

    in the bolt, what do you see?

    John
     
  2. Baber

    Baber TS Member

    Joined:
    Jan 29, 1998
    Messages:
    2,348
    Since you had to transfer this through an FFL I would send it back. If he sent it to you direct and not through an FFL suggest you contact ATF or better still tell him you will unless he send the missing items.
    T
     
  3. ohiomike

    ohiomike Member

    Joined:
    Jan 29, 1998
    Messages:
    146
    I went to gunbroker.com and found the original picture (same as the one you posted), zoomed the view to 400%, and after looking carefully, I think the seller is being honest with you.

    At first, it does look like the bolt is in place, but I can pick up a shadow in the cutout that I don't think would be there if the bolt was present? Also, could what looks like an extractor maybe be a notch in the top of the receiver?
     
  4. cubancigar2000

    cubancigar2000 Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    10,521
    Location:
    Idaho
    I dont see a bolt and I blew it up
     
  5. POWDER RIVER

    POWDER RIVER TS Member

    Joined:
    Jan 29, 1998
    Messages:
    53
    The back of the receiver looks

    like the rest of the receiver-black,

    no shinny spot or reflection.

    John
     
  6. GR Eubanks

    GR Eubanks Active Member

    Joined:
    Jul 30, 2008
    Messages:
    400
    Location:
    Homedale, ID
    I am sorry I do not see a bolt either. If you are in dire need of a bolt there are always a few on e-bay. I can also come up with a 12ga bolt if needed.

    Roger
     
  7. POWDER RIVER

    POWDER RIVER TS Member

    Joined:
    Jan 29, 1998
    Messages:
    53
    I just came up from the workshop-

    it turns out it's a 16 gauge!

    OMG-it just keeps on getting worse.

    John