1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

DT10 Trigger problem

Discussion in 'Shooting Related Threads' started by cf4952, Apr 24, 2011.

Thread Status:
Not open for further replies.
  1. cf4952

    cf4952 Member

    Joined:
    Jan 29, 1998
    Messages:
    372
    Got a problem with my DT10 trigger. Who's the right 'smith for them?
    Thanks,
    Charlie
     
  2. HSLDS

    HSLDS Well-Known Member

    Joined:
    Nov 2, 2006
    Messages:
    6,393
    Location:
    S-E PA
    What's the problem??

    Some are very simple, if not your best bet is probably Cole's
     
  3. cf4952

    cf4952 Member

    Joined:
    Jan 29, 1998
    Messages:
    372
    At first the second hammer was failing to fire sometimes, top or bottom barrel first didn't matter. Took it out and clean with scrubber, lubed with Balistol. Set to top barrel first works fine, set to bottom barrel fired both barrels together.....

    Help.
     
  4. skeezix

    skeezix Member

    Joined:
    Jan 29, 2006
    Messages:
    578
    I sent mine to Phillip Crenwelge a couple years ago for a similar issue. Very good turnaround - and the triggers have been perfect since. Phillips Gunsmithing http://www.phillips-gunsmithing.com/

    Can't go wrong with Coles either.

    John
     
  5. SevenMaryThree

    SevenMaryThree Member

    Joined:
    Aug 28, 2009
    Messages:
    538
    Location:
    Phoenix, AZ
    cf - How old is your DT?
     
  6. HSLDS

    HSLDS Well-Known Member

    Joined:
    Nov 2, 2006
    Messages:
    6,393
    Location:
    S-E PA
    Some of the earliest DT-10s suffered from a problem very similar to this. As I recall it had to do with the tension of the main springs allowing the sears to 'jump' (don't quote me on that - the memory is fading fast...).

    These were repaired early on by Beretta.

    I would sugest that your best bet remains a call to Cole's - factory authorized so they have all the parts as well as being ale to do the service.
     
Thread Status:
Not open for further replies.