1. We have added the ability for anyone to 'bump' threads that they have created. This is mainly useful in the classifieds area where posters constantly bump for sale threads to bring it to the top. This allows them the ability to do that without having to clutter the thread with extra 'TTT' and 'Bump' type posts. To bump it, go inside your thread and click on 'Thread Tools' at the top, then select 'bump'. You can bump only once per 24 hour period.

    For more detailed information please see this post: Thread Bump Functionality.
    Dismiss Notice
  2. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Deleted

Discussion in 'For Sale- Members only' started by W.P.T., Mar 26, 2011.

Thread Status:
Not open for further replies.
  1. W.P.T.

    W.P.T. TS Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    8,371
    I got some down at True Value, .29 each black or white, .19 for the thinner ones, so I bought a dozen of them ... I hate it when shooters gouge other shooters ... WPT ... (YAC) ...
     
  2. W.P.T.

    W.P.T. TS Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    8,371
    Alan,

    White or black nylon reinforced plastic is just that ... When used as comb spacers they are not under any stress or pressure so in reality whats the difference which one is "better" and why are yours better, it boils down to which one is cheaper and will still perform the same job for less money ...

    I have an assortment (50 or so ?) that I purchased from True Value, that go from 1/64th, 1/32nd, 1/16th to .125 in different diameters with different size holes for the posts and have yet to wear one out ... I can walk in and buy them and do not have to wait for the mail ... Please post a few pictures so we can see why yours are better ...

    Respectfully, WPT ... (YAC) ...
     
  3. superxjeff

    superxjeff Active Member

    Rating - 100%
    3   0   0

    Joined:
    Jan 29, 1998
    Messages:
    3,781
    How about a diffrent spin?

    Gas is near 4.00 a gallon. Hardware store is 6 miles from the house. Being a poor boy my old truck only gets 14MPG.

    My time is worth nothing but there are things I would rather do then go to the hardware store.

    I hear what you are saying WPT but on the scale of gouging I would say this this is not. Hell, It's not like he is getting rich.

    I would buy some if I needed them. Jeff
     
  4. Tron

    Tron Supporting Vendor Supporting Vendor

    Rating - 100%
    2   0   0

    Joined:
    Jan 29, 1998
    Messages:
    6,675
    These are made to be comb spacers, they are worth it. Very high quality and alant is great to deal with.
     
  5. FRedmon

    FRedmon Active Member

    0   0   0

    Joined:
    Feb 25, 2008
    Messages:
    1,687
    What is the old saying? If you don't have anything good to say, don't say anything at all.

    FRedmon
     
  6. W.P.T.

    W.P.T. TS Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    8,371
    My point is : Shooters, per say get gouged for any and everything and now it comes down to getting gouged for nylon washers (spacers) and I would bet they were not made to be spacers as Tron suggests ... Maybe the ones I bought at True Value were made to be comb spacers and they didn't know they stumbled onto something they could advertise and rip the shooters off for by doubleing or even tripleing the price ...

    Note .:

    I have comb spacers in black or white nylon reinforced plastic in 5/8, 9/16, 3/4 or 1 inch, hole for post can be what ever size you require ... These are not just plain old ordinary nylon washers, they are truly comb spacers for $.99 each, plus shipping and Insurance ... If this is not expensive (good) enough for you I have the same ones I will sell you for three times the money and they are ever better ... WPT ... (YAC) ...


    Alan, Picture of your spacers (nylon washers) PLEASE ....
     
Thread Status:
Not open for further replies.