1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

??convert a Kolar TS to extract instead of eject??

Discussion in 'Shooting Related Threads' started by 3357, Sep 24, 2011.

Thread Status:
Not open for further replies.
  1. 3357

    3357 Member

    Joined:
    Mar 8, 2007
    Messages:
    769
    Can I do this myself or do I need to send it in? Jess
     
  2. Sky Buster

    Sky Buster Sky Buster TS Supporters

    Joined:
    Jan 29, 1998
    Messages:
    2,977
    Location:
    Minnesota
    You can do it yourself. There should be a small allen screw
    in your parts bag, if your the original owner or it wasn't
    lost. It screws in the forend at the right rear. If you have
    any questions, I would call Kolar.
     
  3. 3357

    3357 Member

    Joined:
    Mar 8, 2007
    Messages:
    769
    I have the parts bag and the screw you mention, I will call them on Monday. Thanks, Jess
     
  4. bjk1972

    bjk1972 Member

    Joined:
    Nov 27, 2010
    Messages:
    596
    I'd call Keith @ Kolar. On a TC model its pretty easy. Remove stock and trigger and the telltale rod is visible( it engages at front of trigger and runs through the reciever to the forearm pawls, about the thickness of a coat hanger with a 90' bend in it at trigger end) Just twist out of block and remove.I'm not sure on the TS.Keith is the man up there, doubt you'd have to send it in.
     
Thread Status:
Not open for further replies.