1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

CITORI GUNSMITHING ADVICE

Discussion in 'Shooting Related Threads' started by CUDA-LOVER, May 28, 2011.

Thread Status:
Not open for further replies.
  1. CUDA-LOVER

    CUDA-LOVER TS Member

    Joined:
    Feb 17, 2011
    Messages:
    17
    HELLO LOOKING FOR ADVICE ON CITORI PLUS COMBO,NEED TO BUILD UP BARREL LUGS TO TIGHTEN UP FOREARM.DO YOU NEED TO BUILD UP AND FILE FIT FOREARM LATCH ALSO.THERE IS A SMALL AMOUNT OF CLEARANCE BETWEEN LATCH AND FRONT NOTCH OF LUG.ANY HELP WOULD BE APPRECIATED... THANKS. NOTE...... I REALIZE THAT WELDING ON REAR OF LUG AND FILE FIT WILL TAKE UP CLEARANCE FROM FRONT TO REAR.BUT WHAT I AM TALKING ABOUT IS UP AND DOWN ON FOREARM TOWARD MUZZLE...THANKS
     
  2. Stl Flyn

    Stl Flyn Well-Known Member

    Joined:
    Apr 6, 2010
    Messages:
    8,742
    If you are looking to tighten the gap between the barrel and the forend, put some masking tape inside the front part of the forend, between the barrel and the forend, one layer at a time. That should tighten it up so it is not loose.
     
Thread Status:
Not open for further replies.