1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.

Canterbury schematics

Discussion in 'Shooting Related Threads' started by TheDog, Apr 16, 2010.

Thread Status:
Not open for further replies.
  1. TheDog

    TheDog TS Member

    Joined:
    Dec 14, 2006
    Messages:
    1
    Hello

    Does anybody have the schematics and circuit layout for the Canterbury control box? Thanks in advance.

    Ron Hammond
    Tuscarora Gun Club
  2. bill1949

    bill1949 Active Member

    Joined:
    Jan 29, 1998
    Messages:
    1,265
  3. green fingers

    green fingers TS Member

    Joined:
    Jan 29, 1998
    Messages:
    9
    Hi Ron. Is your trap an early model? These did not come out with a schematic in the manual. The later versions have an LCD readout with target counter. The wiring schematic for those is on our website. If yours is the early version I can organise a diagram to be drawn up for you from our tech at Canterbury Voice Release.

    green fingers
  4. green fingers

    green fingers TS Member

    Joined:
    Jan 29, 1998
    Messages:
    9
    Hi Ron. If the black serial number plate ( near the trigger and solenoid) is before 10/02 (Oct 2002)you have the early control box. The trap wiring loom is hard wired to that. The later electronic boxes have a disconnectable wiring loom via a CPC 14 pin plug.

    If you have a particular problem or question just ask it and I will reply.

    Cheers green fingers
Thread Status:
Not open for further replies.