1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

BT99 Plus recoil cylinder adjustment

Discussion in 'Shooting Related Threads' started by buckshot57, Jun 4, 2012.

Thread Status:
Not open for further replies.
  1. buckshot57

    buckshot57 TS Member

    Joined:
    Jan 16, 2010
    Messages:
    122
    I just purchased a new cylinder from Browning for my daughters BT99 micro plus. Problem is the old one just snapped & collapsed & the new one is so stiff I can't cause it to collapse. Does it have an adjustment so I can soften it up? If so, any advice would be appreciated.
    thanks,
    jim
     
  2. Don S

    Don S Member

    Joined:
    Jan 29, 1998
    Messages:
    287
    Try unscrewing the butt pad. Inside the tube is a large screw. Loosen this large screw until it gets close to the end. That works for me.

    Don
     
  3. Squeal

    Squeal Member

    Joined:
    Apr 2, 2009
    Messages:
    169
    Take it out and spray some oil in it to losen it up. I bought a new and it was very stiff. I also had to adjust the screw under the bunt pad.
     
Thread Status:
Not open for further replies.