1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

BT99 Main Spring

Discussion in 'Shooting Related Threads' started by Trap0054, Feb 1, 2010.

Thread Status:
Not open for further replies.
  1. Trap0054

    Trap0054 TS Member

    Joined:
    Nov 18, 2009
    Messages:
    3
    I need information on replacing the main spring in a BT99. Can anyone direct me to a manual or video or step by step.

    I removed the trigger plate to get the spring out. Should I have the hammer pin in place when I replace the spring?

    Thank you for your comments.

    Bennett
     
  2. Trap0054

    Trap0054 TS Member

    Joined:
    Nov 18, 2009
    Messages:
    3
  3. blaster

    blaster Member

    Joined:
    Jan 29, 1998
    Messages:
    180
    ok if you have take the trigger group out replace the spring and cock it so it is ready to firer. then easy it back into place with the half dovetail first! then easy the trigger group back in. when gets hard take a rubber hammer and tab. make sure it doesnt go off the replace trigger group pin.
     
  4. oldeyes

    oldeyes TS Member

    Joined:
    Nov 18, 2009
    Messages:
    19
    give jim flyn a call his info is in the traoshooter marketplace,he does great work im sure if you call him he will help you.i have used him a couple times with great results.
     
Thread Status:
Not open for further replies.