1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

BT99 EJECTER ROD

Discussion in 'Shooting Related Threads' started by reddottm1, Apr 13, 2011.

Thread Status:
Not open for further replies.
  1. reddottm1

    reddottm1 Member

    Joined:
    Jan 23, 2007
    Messages:
    93
    How complicated is it to change a bt99 ejector rod, are they easy or hard?
     
  2. neofight

    neofight TS Member

    Joined:
    Apr 1, 2010
    Messages:
    465
    I could be wrong, but i don't think any of the BT99s came out with an ejector. Mine has the usual extractor that does just that, extracts without ejecting. Is yours stuck, bent or broken?
     
  3. timberfaller

    timberfaller Well-Known Member

    Joined:
    Feb 24, 2007
    Messages:
    7,946
    Location:
    Eastern Washington
    I have a BT 99 made in 1979 that still throws emptys 20 feet!

    Don't stand behind me!

    Can't help ya reddot, looking at a schematic, it doesn't look like its to big of a job.
     
  4. Stl Flyn

    Stl Flyn Well-Known Member

    Joined:
    Apr 6, 2010
    Messages:
    8,696
    It is easy. You have to fit it to the gun though. It should already be bent close to where it has to go, but may need some minor bending and some filing to get it to fit correctly. When you pull the stock off, look at the original, and how it fits in there. The little disk that is welded onto the rod fits in the slot in the receiver. Jon
     
Thread Status:
Not open for further replies.