1. We have added the ability for anyone to 'bump' threads that they have created. This is mainly useful in the classifieds area where posters constantly bump for sale threads to bring it to the top. This allows them the ability to do that without having to clutter the thread with extra 'TTT' and 'Bump' type posts. To bump it, go inside your thread and click on 'Thread Tools' at the top, then select 'bump'. You can bump only once per 24 hour period.

    For more detailed information please see this post: Thread Bump Functionality.
    Dismiss Notice
  2. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice


Discussion in 'For Sale- Vendors Only' started by Jim Flynn, Dec 7, 2016.

  1. Jim Flynn

    Jim Flynn Member Supporting Vendor

    Nov 25, 2007
    Grants Pass Oregon
    One of the worst things that can be done to a BT99 is to leave it cocked. The main spring will take a set and dramatically increase the lock time. A factory music wire spring is continually degrading, loosing power and increasing lock time. Our chrome silicone hammer spring will give thousands of consistent cycles. You can actually hear the decrease in lock time when you install one of our springs. If you are missing some targets that your thought you were right on, it is most likely a slow lock time that is sneaking up and robbing you.
    Our kit also includes a chrome silicone top lever spring that will tighten up the locking bolt to barrel interface.
    This kit is a very inexpensive way to tune up your BT99 for the season ahead. We even have them on sale for a short period of time. We always ship Priority Mail so your order is received in two to three days. Do yourself a favor and install this kit. Check out the link below. Thank you JIM & PETE

    J&P Custom Products, LLC | Gun Springs Manufacturing