1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.

Browning Choke Tubes

Discussion in 'Shooting Related Threads' started by Oregunner, Aug 10, 2013.

  1. Oregunner

    Oregunner Well-Known Member

    Joined:
    Aug 15, 2006
    Messages:
    2,120
    Location:
    Oregon
    This is an Invector Plus choke. It is for an over bored Browning barrel. A Remington barrel probably wouldn't have enough metal to install these chokes and the constriction would be off for the barrel bore. Mark
  2. Oregunner

    Oregunner Well-Known Member

    Joined:
    Aug 15, 2006
    Messages:
    2,120
    Location:
    Oregon
    Talk to Briley. Most fixed choke Remington barrels aren't thick enough for installing RemChokes. If you send them your barrel, they will mic it, and tell you what your options are. Another option might be to just get another Remington barrel that is already threaded for RemChokes, depending on which gun you have, and the availability of extra barrels. Some are very common and inexpensive. Mark
  3. Oregunner

    Oregunner Well-Known Member

    Joined:
    Aug 15, 2006
    Messages:
    2,120
    Location:
    Oregon
    So, you are looking for a Remington 1100 target barrel, with Remchokes? What length? 30"? Mark
  4. mikey357

    mikey357 Member

    Joined:
    Jan 29, 1998
    Messages:
    140