1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Broke my hammer spring in my Perazzi.

Discussion in 'Shooting Related Threads' started by BigM-Perazzi, Jul 14, 2009.

Thread Status:
Not open for further replies.
  1. BigM-Perazzi

    BigM-Perazzi Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    8,542
    Location:
    HELL, MICHIGAN
    Yes, it finally happened again. 25,000 rounds later, the 2nd I've had to replace.
    Of course, having that 2nd trigger assembly at hand, didn't keep the line waiting. Showed the worried patrons how to change the spring in a release in 1 minute 15 seconds (dropped the wrench once).

    As an aside. Had to loan my Super x1 to a poor 1100 shooter who broke some doodad in his gun.... I've ruined him for life lol..


    Big [​IMG] Perazzi!!!
     
  2. BigM-Perazzi

    BigM-Perazzi Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    8,542
    Location:
    HELL, MICHIGAN
    Uh, well, we do have

    Western Michigan

    Eastern Michigan

    and

    Delaware State (who??? remember Toledo! remember Appalachian State!)

    Sooo, I'll get back to you, say, 4th game of the season? ok?
     
  3. highflyer

    highflyer TS Member

    Joined:
    Feb 1, 2006
    Messages:
    2,474
    It's a small world. I waited on a guy to fix his Perazzi this weekend.
     
  4. BigM-Perazzi

    BigM-Perazzi Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    8,542
    Location:
    HELL, MICHIGAN
    Highflyer, I imagine he was just admiring the mechanical simplicity of the design.. lol
     
  5. Dennisw

    Dennisw Member

    Joined:
    Jan 29, 1998
    Messages:
    339
    Hammer spring in a Perazzi $60.00
    Firing pin spring in an 1100 $ 4.00,
    Saw 3 Perazzi hammer springs break at the last shoot i was at.
     
  6. 391 shooter

    391 shooter Well-Known Member

    Joined:
    Jun 3, 2008
    Messages:
    2,094
    Well, no surprises here.
     
  7. JRW

    JRW Member

    Joined:
    Jan 29, 1998
    Messages:
    823
    BigM Go Michigan State, go Ohio State and I would tell you where to go but you live there. LOL ( for those interested Jim lives in Hell MI.) Jerry in MI.
     
  8. miketmx

    miketmx Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    2,964
    Whiz White sells a pair of Perazzi hammer springs for $ 52 and they are guaranteed against breakage for a year.
     
  9. BigM-Perazzi

    BigM-Perazzi Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    8,542
    Location:
    HELL, MICHIGAN
    Ok, open challenge. Let's time changing a perazzi spring v. a 1100 firing pin spring. We can set it up at the Grand American...
     
  10. frostyman

    frostyman Well-Known Member

    Joined:
    Jan 29, 2006
    Messages:
    1,038
    Location:
    missouri
    How about timing the changing of a Ljutic spring. Oh wait they never break but if they ever did it would take about 15 seconds.
     
  11. Hitapair

    Hitapair Active Member

    Joined:
    Jan 29, 1998
    Messages:
    2,344
    I thought I saw Whiz had new heavy duty springs that were more expensive than 52/pr. Think it was 38 a pop.
     
  12. oldgahchamp

    oldgahchamp Active Member

    Joined:
    Jan 29, 1998
    Messages:
    1,263
    I think a Ljutic spring is around $12. if they should break. Larry
     
  13. Barry C. Roach

    Barry C. Roach Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    9,209
    Location:
    Scottsdale, AZ
    Whiz's new P springs are $35 ea. Shipping is $4.
     
  14. Barry C. Roach

    Barry C. Roach Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    9,209
    Location:
    Scottsdale, AZ
    George's K80 broke a spring at Boondocks TC. He said he'll get it back in a couple of weeks.
    Willy's Browning broke a spring " " " " * * * * " .
    John's Pgun " " " " " " He reached in his kit and replaced the spring and was back on the line in 5 minutes.
     
Thread Status:
Not open for further replies.