1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

?Bore brush threads.

Discussion in 'Shooting Related Threads' started by b12, May 13, 2012.

Thread Status:
Not open for further replies.
  1. b12

    b12 Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    3,045
    anybody know what the threads on the cleanning rods are. I have different threads on the bore brushes and cleanning jags. When I go buy new ones I take a chance of getting the wright threads. Bill
     
  2. 320090T

    320090T Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    3,348
    Location:
    Indiana
    5/16 x 27. I ordered my tap and die from MSC.
     
  3. Unknown1

    Unknown1 Well-Known Member

    Joined:
    Nov 5, 2009
    Messages:
    3,397
    I have an old cleaning rod that's tapped 1/4" x 20 and everything I can buy for it is 1/4"x24. It's easy enough to rethread the brushes, jags and mops with a 14"x20 die.

    Keller
     
  4. Unknown1

    Unknown1 Well-Known Member

    Joined:
    Nov 5, 2009
    Messages:
    3,397
    I have an old cleaning rod that's tapped 1/4" x 20 and everything I can buy for it is 1/4"x24. It's easy enough to rethread the brushes, jags and mops with a 14"x20 die.

    Keller
     
  5. Unknown1

    Unknown1 Well-Known Member

    Joined:
    Nov 5, 2009
    Messages:
    3,397
    I have an old cleaning rod that's tapped 1/4" x 20 and everything I can buy for it is 1/4" x 24. It's easy enough to rethread the brushes, jags and mops with a 14"x20 die.

    Keller
     
  6. Unknown1

    Unknown1 Well-Known Member

    Joined:
    Nov 5, 2009
    Messages:
    3,397
    I have an old cleaning rod that's tapped 1/4" x 20 and everything I can buy for it is 1/4" x 24. It's easy enough to re-thread the brushes, jags and mops with a 14"x20 die.

    Keller
     
Thread Status:
Not open for further replies.