1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Blaser O/U Barrel Hanger

Discussion in 'Shooting Related Threads' started by stuka, Feb 22, 2012.

Thread Status:
Not open for further replies.
  1. stuka

    stuka Member

    Joined:
    Apr 7, 2011
    Messages:
    103
    My grandson has a Blaser F3 Super Trap Combo. The top barrel of the O/U does not shoot as high as the bottom barrel, in other words not in the same place.

    Does anyone know is there are barrel hangers available to change out to make the top barrel shoot in the same place as the bottom barrel.
     
  2. vpr80

    vpr80 Active Member

    Joined:
    Aug 25, 2009
    Messages:
    1,636
    They don't shoot in the same place by design. Bottom barrel shoots higher for the first shot that is up close and the top barrel shoots flatter for the far second shot. It's meant to be that way so I would not suggest messing with it unless you are 100% sure that you know what you are doing and want to change the POI.
     
  3. ps8182

    ps8182 TS Member

    Joined:
    Jan 29, 1998
    Messages:
    115
    I'm not sure, but I thought I've heard talk that one of the unique features of the Blaser O/U was that the POI was adjustable for both barrels.
     
  4. guinner16

    guinner16 TS Member

    Joined:
    Nov 15, 2011
    Messages:
    308
    I have the unsingle only, but i thought they meant poi is adjustable on both barrels as in both the unsingle and OU, both barrels of just the OU barrel.
     
  5. skeet_man

    skeet_man Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    10,510
    Location:
    Rochester, NY
    The adjustable rib adjusts the top barrel, the hangers adjust the bottom...
     
  6. ps8182

    ps8182 TS Member

    Joined:
    Jan 29, 1998
    Messages:
    115
    http://www.alamosportingarms.com/index.php?page=shop.browse&category_id=37&option=com_virtuemart&Itemid=3
     
  7. Trent

    Trent TS Member

    Joined:
    Nov 16, 2010
    Messages:
    23
    I had the opposite problem, mine shot the same and I wanted the bottom to shoot higher. Call Blaser, they can ship you a hanger and it only takes 2 minutes to replace....
     
  8. Dr.Longshot

    Dr.Longshot Banned Banned

    Joined:
    Jan 29, 1998
    Messages:
    5,722
    Their #1 Hangar is the highest shooting hangar for the under Bbl, They will exchange hangars w/you, be sure to ask for the Allen Wrench to fit allen screw
    It is a small metric and very hard to find one.

    You adjust the rib for top Bbl POI and change hangar for bottom Bbl POI.

    Gary Bryant
    Dr.longshot
     
  9. stuka

    stuka Member

    Joined:
    Apr 7, 2011
    Messages:
    103
    Thanks Dr. Longshot. I will check again as there may be one more notch to lower the rib and if not I will get another hanger.

    Dean Shepardson
     
  10. Jon Reitz

    Jon Reitz Well-Known Member

    Joined:
    Aug 10, 2006
    Messages:
    2,195
    Location:
    West Clarksville, NY
    Dean,

    Chris Vendel has them. I would give him a call.

    CRV Custom Arms

    110 Halstead Street, #4

    Rochester, NY

    14610

    585) 730-8166 (shop)

    585) 331-8161 (cell)

    Good luck,

    Jon Reitz
     
Thread Status:
Not open for further replies.
Search tags for this page

blaser barrel hanger

,

blaser barrel hangers

,

blaser barrels hangers

,

blaser f3 composite rib

,

bottom barrel shoots high