1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Blaser F3 Comb question

Discussion in 'Shooting Related Threads' started by hoffman06, Aug 18, 2011.

Thread Status:
Not open for further replies.
  1. hoffman06

    hoffman06 Member

    Joined:
    May 6, 2009
    Messages:
    482
    Location:
    Marcola Oregon
    Guys a friend just bought a used Blaser F3 and went to adjust the comb and it will not come off. It looks like a simple loosening of the 2 sloted comb screws. Both backed out just fine, no thread problems. Front loosened and will come off but the rear, even with the screw removed will not allow the comb to be removed. Are we missing somthing, any help is appreciated.
    Carey
     
  2. Sprinklerman

    Sprinklerman Member

    Joined:
    Jan 29, 1998
    Messages:
    765
    Location:
    Bassett, NE
    only turn the screws a quarter turn. the post have step teeth that lock together
     
  3. Ruck

    Ruck Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    2,045
    The 2 slotted screws only hold the serrated inserts in the larger adjustment screws. The comb screws adjust with a 4mm Allen wrench. Tighten the sotted screws before you loosen the 4mm adjustment screws.

    Ken Rucker
     
  4. hoffman06

    hoffman06 Member

    Joined:
    May 6, 2009
    Messages:
    482
    Location:
    Marcola Oregon
    Thanks guys, just ask and someone knows the answer, it was just as Ruck said.
    Carey
     
Thread Status:
Not open for further replies.
Search tags for this page
blaser f3 comb adjustment
,

how to adjust comb on blaser f3