1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Berretta 303 stock removal

Discussion in 'Shooting Related Threads' started by J.D. Squire, Jan 12, 2010.

Thread Status:
Not open for further replies.
  1. J.D. Squire

    J.D. Squire Member

    Joined:
    Sep 23, 2007
    Messages:
    194
    How do i take the stock off of a Beretta 303, its my hunting gun and the stock came loose so i thought i'd take it off and clean the whole thing but i am unable to take the stock off. Thanks in advanced

    J.D.
     
  2. jsteenson

    jsteenson Member

    Joined:
    Jan 29, 1998
    Messages:
    223
    Take off the recoild pad and in the stock is a long bolt. remove it. Jack
     
  3. acss

    acss Well-Known Member Supporting Vendor

    Joined:
    Feb 7, 2006
    Messages:
    5,986
    Location:
    rock port, mo
    i took a 19MM socket and ground the back 1/2 down to a pretty good taper. this lets you go in at an angle
     
  4. J.D. Squire

    J.D. Squire Member

    Joined:
    Sep 23, 2007
    Messages:
    194
    haha you know it! tell miller its his fault, the gun used to be his you know!

    Well then i prolly won't see you guys for a long time as cold as its been around here + with all the snow we have had!

    J.D.
     
  5. cubancigar2000

    cubancigar2000 Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    10,521
    Location:
    Idaho
    sometimes when you try to get the nut off ( which does take a thin wall socket) the rod that runs through the stock will come loose from teh reciver. It should be loctited in but it may not be
     
  6. 410 JIM

    410 JIM TS Member

    Joined:
    Feb 26, 2007
    Messages:
    176
    If you have a 3 inch barrel and want to shoot light loads you can cut the action spring off 4 inches while you have ther gun apart.
     
  7. nailer123

    nailer123 TS Member

    Joined:
    Feb 19, 2008
    Messages:
    335
    I bet your girlfriend at cubbys has a good tool box she has been around along time not say she is old but she has alot of miles on her i wish i could post a pic of her.
     
  8. J.D. Squire

    J.D. Squire Member

    Joined:
    Sep 23, 2007
    Messages:
    194
    kirk don;t be that guy!ahahah
     
  9. J.D. Squire

    J.D. Squire Member

    Joined:
    Sep 23, 2007
    Messages:
    194
    thanks wally, real, real nice! ahahah good one though
     
  10. JJM

    JJM Member

    Joined:
    Jan 29, 1998
    Messages:
    377
    Location:
    Omaha, NE / Mesa, AZ
    J.D. get a 12 point 3/4 inch socket 3/8 drive and it will fir the nut you are trying to remove.
    Joe
    PS: You still owe me 4 Tacos from El Bee's
     
  11. J.D. Squire

    J.D. Squire Member

    Joined:
    Sep 23, 2007
    Messages:
    194
    Thanks Joe - hope your having good weather down there!
     
Thread Status:
Not open for further replies.
Search tags for this page

beretta 303 stock removal

,
beretta 303 stovk removal
,
beretta a303 stock loose
,
beretta a303 stock removal