1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.

Beretta stock

Discussion in 'Shooting Related Threads' started by Franktri, Jun 11, 2011.

Thread Status:
Not open for further replies.
  1. Franktri

    Franktri Member

    Joined:
    Mar 30, 2009
    Messages:
    220
    Has anyone experienced the following: I recently changed my 682 stock back to its original stock ( had a field stock on it before). In the process, I must have lost a washer so that, when I tightened the stock, the bolt prevented the trigger from working. The only way I could pull the trigger was to loosen the bolt. As a result, the recoil cracked the stock right at the pistol grip. Apparently, the washer would have made the bolt stand off enough to prevent this from happening. Comments?
  2. Jimmyc

    Jimmyc TS Member

    Joined:
    Jan 29, 1998
    Messages:
    450
    You figured it out. That's the way berettas work. Also watch changing any stocks especially if they have lots of cast in them. Glass bed and gunsmith fit is the best motto.
    Jimmy
  3. Tron

    Tron Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    4,787
    STOP!!! Put a washer back in place or you can snap the trigger.....and that's a BITCH to replace!
Thread Status:
Not open for further replies.