1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

beretta so5 stock removal

Discussion in 'Shooting Related Threads' started by bigmike, Dec 4, 2009.

Thread Status:
Not open for further replies.
  1. bigmike

    bigmike TS Member

    Joined:
    Oct 30, 2009
    Messages:
    43
    James, take recoil pad loose and see if stock has stockbolt connecting it to the receiver.shoot well,bigmike
     
  2. jfhfly

    jfhfly TS Member

    Joined:
    Dec 2, 2009
    Messages:
    1
    Thanks for the reply, but there is no stock bolt on a SO5.
     
  3. jhh

    jhh Member

    Joined:
    Oct 16, 2007
    Messages:
    89
    The stock will come off once you take off the trigger plate. The stock is "clamped" between the top tang and the trigger plate. The trigger plate has a beveled section that extends up into the stock to "pull" the stock forward into the action as the tang screw is tightened. Trigger plate has screw holding it to the action in front of the trigger guard. Regards, John Hancock
     
Thread Status:
Not open for further replies.
Search tags for this page

stock removal beretta so5