1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Beretta Silver Pigeon

Discussion in 'Shooting Related Threads' started by Rich219, May 1, 2011.

Thread Status:
Not open for further replies.
  1. Rich219

    Rich219 Active Member

    Joined:
    Aug 25, 2009
    Messages:
    2,125
    How do I remove the stock from a Beretta Silver Pigeon? Which screws do I remove?
     
  2. milkmaster

    milkmaster TS Member

    Joined:
    May 24, 2007
    Messages:
    20
    The butt pad is held onto the stock with two phillips screws. Put a drop of oil on the tip of your screw driver to help it go down through the rubber easily to get to the screw heads. Once the butt pad is off, then you will see a hole in the end of the buttstock. If it has not been changed, a 6mm allen wrench will inscrew the long stock botl that holds it on. I used a socket extension on a socket allen wrench that worked wonderfully. Just remember not to overtighten the bolt when you put it back on. Good Luck!
     
  3. Old Cowboy

    Old Cowboy Active Member

    Joined:
    Jan 29, 1998
    Messages:
    2,988
    If it's still got the stuff it came with new, that 10" long hex wrench with the blue plastic handle is the stock bolt wrench.

    John C. Saubak
     
  4. Rich219

    Rich219 Active Member

    Joined:
    Aug 25, 2009
    Messages:
    2,125
    It doesn't have the tools it came with unfortunately.
     
Thread Status:
Not open for further replies.