1. We have added the ability for anyone to 'bump' threads that they have created. This is mainly useful in the classifieds area where posters constantly bump for sale threads to bring it to the top. This allows them the ability to do that without having to clutter the thread with extra 'TTT' and 'Bump' type posts. To bump it, go inside your thread and click on 'Thread Tools' at the top, then select 'bump'. You can bump only once per 24 hour period.

    For more detailed information please see this post: Thread Bump Functionality.
    Dismiss Notice
  2. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

For Sale BERETTA AUTO SPRING KITS

Discussion in 'For Sale- Vendors Only' started by Jim Flynn, Oct 7, 2016.

  1. Jim Flynn

    Jim Flynn Member Supporting Vendor

    Joined:
    Nov 25, 2007
    Messages:
    22
    Location:
    Grants Pass Oregon
    BERETTA 300, 301, 302, 303 and 304 12 GAUGE SERIES RECOIL SPRINGS
    We now have available recoil springs for the Beretta 300, 301, 302, 303 and 304 series shotguns. These are a direct copy of the factory spring but made from the finest chrome silicone wire available. These springs will produce thousands of repeatable cycles and are very resistant to taking a set. If you have been shooting your 300, 301, 302, 303 or 304 for a while you really need to change out this spring. The factory music wire spring degrades with each cycle and takes a tremendous amount of set. A new chrome silicone spring will reduce recoil and excessive wear to your shotgun. Here is a link:
    J&P Custom Products, LLC | Gun Springs Manufacturing
    We also have a chrome silicone firing pin spring available.
    This Firing Pin Spring fits all 12 gauge Beretta 300 Series shotguns except the Extrema model. This spring is an exact copy of the factory spring except our spring is made from the best chrome silicone wire available and will give thousands of repeatable cycles. We have serviced thousands of Beretta 300 series shotguns over the years and this firing pin has been a problem in many shotguns. Light primer strikes and misfires with the Beretta 300’s are usually caused by a broken firing pin spring. We have actually found one that was broken in 6 pieces and so wound up on itself that the spring was a solid mass. Our chrome silicone spring solves this problem. It is simply a stronger, better quality spring. Here is the link:
    J&P Custom Products, LLC | Gun Springs Manufacturing
    We also offer these two springs and our very popular Beretta 300 series hammer spring in a three spring kit which will service all the springs in a 391 series shotgun. Check out the following link for the complete set:
    J&P Custom Products, LLC | Gun Springs Manufacturing
    Thank you,
    jnpgunsprings.com
     
    Last edited: Nov 17, 2016
  2. Woodsie131

    Woodsie131 Member

    Joined:
    Jun 8, 2008
    Messages:
    60
    What about A400 springs?
     
  3. Jim Flynn

    Jim Flynn Member Supporting Vendor

    Joined:
    Nov 25, 2007
    Messages:
    22
    Location:
    Grants Pass Oregon