1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Beretta 391 Parrallel Comb Question

Discussion in 'Shooting Related Threads' started by VAMiket, Feb 8, 2010.

Thread Status:
Not open for further replies.
  1. VAMiket

    VAMiket Member

    Joined:
    Jan 29, 1998
    Messages:
    184
    Has anyone shot one of these guns and if so what percentage ( 60/40, 70/30, etc) did the gun shoot?

    Thx.
     
  2. acss

    acss Well-Known Member Supporting Vendor

    Joined:
    Feb 7, 2006
    Messages:
    5,985
    Location:
    rock port, mo
    60%--
     
  3. M R Ducks

    M R Ducks Member

    Joined:
    Jul 13, 2007
    Messages:
    667
    Location:
    Kabul, Afghanistan
    between dead falt and 60%. Send the stock to Tron, get an adjustable comb and shoot up to 90%.
     
  4. short shucker

    short shucker TS Member

    Joined:
    Jan 29, 1998
    Messages:
    3,939
    What M R Ducks said.

    ss
     
  5. Spanky

    Spanky Active Member

    Joined:
    Jan 29, 1998
    Messages:
    1,437
    I own two 391's (Optima Trap, Optima Sporting) but not the Parallel Target. I know guys who do and they shoot trap, skeet and sporting with them. Out of the box they don't shoot too high. That parallel comb is a good feature. Especially if getting some comb work done to it.
     
  6. Setterman

    Setterman Well-Known Member

    Joined:
    Feb 12, 2007
    Messages:
    11,143
    The optima trap with the factory adjustible comb will not shoot 100% for me. Ran out of comb height. Tron makes a nifty replacement set that goes higher. The factory hardware is junk.
     
  7. bridgetoofar

    bridgetoofar TS Member

    Joined:
    Jan 29, 1998
    Messages:
    971
    Be aware that the grip on a PT is different than that on a Trap model. The grip has a close tight radius. Great for small hands, but not for mine... very uncomfy for me.
     
  8. short shucker

    short shucker TS Member

    Joined:
    Jan 29, 1998
    Messages:
    3,939
    btf,

    Were you shooting a SL or RL model? I'd say you were shooting an RL. They not only shorten the stock LOP, but also the reach and grip size for those of a smaller stature.

    ss
     
  9. bridgetoofar

    bridgetoofar TS Member

    Joined:
    Jan 29, 1998
    Messages:
    971
Thread Status:
Not open for further replies.