1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Beretta 303A problem

Discussion in 'Shooting Related Threads' started by DadPlus4, Oct 9, 2011.

Thread Status:
Not open for further replies.
  1. DadPlus4

    DadPlus4 Member

    Joined:
    Aug 4, 2009
    Messages:
    111
    i have a 303A that is cycling thru the shells - full auto. one pull of the trigger and it cycles thru the chamber and one in the tube. I disassembled and cleaned out the action and still does it.
    Anyone come across this or any recommendations on 'smiths who are semi-auto specialists?

    thanks shooter community!
     
  2. Tron

    Tron Supporting Vendor Supporting Vendor

    Joined:
    Jan 29, 1998
    Messages:
    6,673
    Check the hammer braces.
     
  3. cubancigar2000

    cubancigar2000 Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    10,521
    Location:
    Idaho
    as tron says but if not that it is in the trigger assy somewhere
     
  4. beaker100

    beaker100 Member

    Joined:
    Jan 29, 1998
    Messages:
    898
    hi dad, it might be someone made a release then tried to convert back to pull. or it could be a trigger job gone bad. pay particular attention to sear (which is part of the trigger and the interupter. sometimes people get to grinding on these parts and ruin them. call if you have any questions doug hubbart gunsmith (573)286-9905 jd28hd@aol.com
     
  5. acss

    acss Well-Known Member Supporting Vendor

    Joined:
    Feb 7, 2006
    Messages:
    5,986
    Location:
    rock port, mo
    beaker100 is right on track--i'll bet on the sear , as the problem
     
  6. DadPlus4

    DadPlus4 Member

    Joined:
    Aug 4, 2009
    Messages:
    111
    thx gang - will take a look
     
Thread Status:
Not open for further replies.