1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Beretta 302 stock removeal ??

Discussion in 'Shooting Related Threads' started by Hardcsh, Sep 30, 2012.

Thread Status:
Not open for further replies.
  1. Hardcsh

    Hardcsh Member

    Joined:
    Feb 18, 2012
    Messages:
    63
    How do I remove the butt stock for a Beretta 302 ?
    I there a special size socket ?
     
  2. RayReys

    RayReys Member

    Joined:
    Sep 8, 2011
    Messages:
    381
    I tightened mine recently- standard socket... Can't remember the mm size though
     
  3. EuroJoe

    EuroJoe TS Supporters TS Supporters

    Joined:
    May 3, 2008
    Messages:
    3,359
    Location:
    Rockford,IL
    PROBABLY 13mm
     
  4. lightning20ga

    lightning20ga Member

    Joined:
    Apr 1, 2011
    Messages:
    820
    most likely 10 mm or 12
     
  5. lightning20ga

    lightning20ga Member

    Joined:
    Apr 1, 2011
    Messages:
    820
    10mm or 12 use 1/4 drive set dont over tighten snug it an a little green lock tite
     
  6. TBFA

    TBFA Member

    Joined:
    Oct 13, 2010
    Messages:
    364
    if it is the same size as a 303 it is a 19mm
     
  7. lightning20ga

    lightning20ga Member

    Joined:
    Apr 1, 2011
    Messages:
    820
    19 mm on a stock? thats large never seen that
     
  8. cubancigar2000

    cubancigar2000 Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    10,521
    Location:
    Idaho
    it is 13 mm and should have a slot in it where you may be able to use a wide screw driver as qwell as a ( thin) socket)
     
  9. motordoctor

    motordoctor Shoji Tabuchi in Branson

    Joined:
    Jan 29, 1998
    Messages:
    3,687
    Location:
    ohio
    19 mm is correct for the 303/302.. 391 is different motordoc
     
Thread Status:
Not open for further replies.