1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Beomat Problem

Discussion in 'Shooting Related Threads' started by deereRalph, Aug 26, 2011.

Thread Status:
Not open for further replies.
  1. deereRalph

    deereRalph Member

    Joined:
    Jan 29, 1998
    Messages:
    90
    Need help. Beomat will not occilate(sp). When turned on will move until the the machine goes far enough to the right or left for the interruptetr to kick in to make the the machine stop moving, right or left. It stops, we checked the micro switches, they seem to be o.k. Any help would be appreciated. Thanks,
    Grif
     
  2. Bob Hawkes

    Bob Hawkes Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    3,904
    Grif, I don't know if you're talking a SuperStar or an earlier model. I wiould call Shyda's or QRP, they should be able to help you. Good luck, Bob
     
  3. over the hill

    over the hill Active Member

    Joined:
    Aug 30, 2007
    Messages:
    1,377
    Assume you used a test set to check voltages???

    Damn micro switches can be deceiving.



    Regards....Gerald
     
  4. cubancigar2000

    cubancigar2000 Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    10,521
    Location:
    Idaho
    check the cam and make sure it has not come loose and slipped down so it wont oscilate
     
Thread Status:
Not open for further replies.