1. We have added the ability for anyone to 'bump' threads that they have created. This is mainly useful in the classifieds area where posters constantly bump for sale threads to bring it to the top. This allows them the ability to do that without having to clutter the thread with extra 'TTT' and 'Bump' type posts. To bump it, go inside your thread and click on 'Thread Tools' at the top, then select 'bump'. You can bump only once per 24 hour period.

    For more detailed information please see this post: Thread Bump Functionality.
    Dismiss Notice
  2. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Availability/ MX 3 Single Barrel

Discussion in 'For Sale- Members only' started by Joe Woods, May 1, 2009.

Thread Status:
Not open for further replies.
  1. Joe Woods

    Joe Woods Well-Known Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    1,496
    Anybody ever install barrel on MX3 frame.I have a club member who recently
    returned to trap shooting and has a relatively new or little used Perazzi MX3
    Over & Under Shotgun . He asked if an additional single barrel assembly was available for his gun.This gun is likely 15 to 20 yrs. old.

    Thankyou:


    Joe Woods/Ontario
     
  2. JACK

    JACK Well-Known Member Supporting Vendor

    Rating - 100%
    37   0   0

    Joined:
    Apr 28, 2006
    Messages:
    14,735
    Location:
    NW Wisconsin
    Joe would you clarify this thread? I do not understand your query
     
  3. MX3BT99

    MX3BT99 TS Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    93
    Hi Joe
    Yes he can get an MX3 single barrel and have it fitted to the frame to make an combo set. I did it about nine years ago to my mx3 o/u
    Good mx3 single barrels are hard to come by, but there out there.
    Good luck
     
  4. jbshep

    jbshep Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    316
    I've got an extra MX3 single barrel that I would swap for and O/U.
     
Thread Status:
Not open for further replies.